OK, i have a 93 S10 that i am swapping onto a 94 S10 ZR2 4wd chassis/suspension, i was planning on keeping the stock 93 4.3/4L60E for the time being, but came across a 350 TPI locally for 125 bucks. Its a complete long block with the lower TPI intake, and the plenum and runners and TB can be had for pretty cheap, so im thinking this would be a great setup, with lots of torque for my 4wd project. And while the 7730 is a great ECM that has lots of options as far as tuning goes, as far as i know, it wont control a 4L60E trans.

Does anybody know if there is an OBD 1 ECM that i can use that will control both? I know i can keep the stock ECM to just control the trans, and use a 7730 to run the engine, but that just seems like alot of hassle and to complex.

Thanks for the help.