Results 1 to 15 of 31

Thread: 16197429 Documentation Project

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026

    16197429 Documentation Project

    the 7429 is the PCM from the 93-95 northstar cars, while it's in my posession, i'm going to try and document as much of the hardware as possible.

    these are P66 PCMs with both 68HC11F1s on a single board. two 27C512 PROMs in a single MEMCAL with a modified P4 knock filter.

    3 32 pin connectors, of which only 6 pins aren't used in some form in any factory application. these things are LOADED with hardware, a total of 41 ICs, most of which i can't identify yet.

    interesting stuff found so far: there are 8 FETs used that drive the injectors, there is another identical FET right by them so i was curious to see what it does. it's output runs through a large 1 ohm, 1% resistor and goes on to power the pressure control solenoid in the 4T80E. marked as a 9395, most likely an IRF9395.

    i'll probably have some pics up tomorrow.
    Attached Files Attached Files
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


Similar Threads

  1. TunerPro XDF for 0411 LS1 PCM Project!
    By EagleMark in forum OBDII Tuning
    Replies: 31
    Last Post: 10-10-2023, 06:23 AM
  2. My Dual TBI Camaro Project
    By gregs78cam in forum GM EFI Systems
    Replies: 82
    Last Post: 04-13-2013, 09:15 PM
  3. Various injector sets for your V6 project
    By Playtoy_18 in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 04-06-2013, 04:26 AM
  4. Documentation Posse
    By historystamp in forum TunerPro Tuning Talk
    Replies: 28
    Last Post: 02-05-2012, 11:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •