possibility. i don't know enough about the concept to be certain.
here is what they look like raw:
3.4
3100
now, the 3100 got significantly better heads, yet is shown with smaller values. they both use the same injectors even. there is no conventional BPC value in the calibration either(or injector flowrate or cylinder size or......), but there is one that seems to be hidden in the algorithm, i believe it is also a 16 bit value, even though it's the same between a 3.4 and 3.1.
these, if you were to use the normal X*(100/255) VE% conversion come out to 400+% range...
i just look at the logs and change each cell by a number that i feel is safe to get them in line.
Bookmarks