Help! '94 3.4L Datalogging

**WhiteCam94** · 08-23-2013

Hey guys, I've just started getting into tuning my car (It's a 1994 camaro 3.4 manual trans.), I just got a laptop, C.A.T.S. Tuner, and an ALDL cable from Tunercat. I changed a couple little things like desired idle rpm and fan enable temps and I decided I wanted to do some REAL tuning....... and I realized that I have no way to datalog. Upon further research, I can't find a damn thing about what program, if any, supports datalogging with the stock 3.4 pcm. Are there any tricks or whatnots I can pull to get a program like Datamaster to think it's reading a different pcm....or something.....?
Thanks guys! I appreciate any and all help.

**RobertISaar** · 08-23-2013

tunerpro rt v5. i've massaged the definition for this application(93-95 3100/3.4RWD) quite a bit. it's the same ADX i use on my car without any issues.

**WhiteCam94** · 08-23-2013

Originally Posted by RobertISaar

tunerpro rt v5. i've massaged the definition for this application(93-95 3100/3.4RWD) quite a bit. it's the same ADX i use on my car without any issues.

Alright I'll give that a shot. Thanks a bunch! I really appreciate it. Oh also, I have seen alot of your posts on here and other forums, you do some great work!

**WhiteCam94** · 08-23-2013

So Robert.... I got it to log data, but it won't output any 2d graphs or anything on the "dash" or monitors....Here's the file. If anyone could take a look at this and see if they see any clues as to what I'm doing wrong, I'll be your friend forever (or just look at my log for me seeing as I can't see ****

**RobertISaar** · 08-23-2013

no data on the dash is because i never bothered to build one. you can right-click and choose values to display or build a full custom dash if you wanted to.

monitors is the same situation. right-click and select values to display.

**WhiteCam94** · 08-23-2013

Ah, i see. So then in your experience, what (if there are any options available at all) can I do to display this data as a graph? Turns out I'm not too good at watching 42 different lines of data at a time...Visual respresentation would make this much easier.