Where would I post questions about winaldl?
Where would I post questions about winaldl?
How about right here! I moved it from Introductions and...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
i'm no expert like the rest of these guys but i dont think winaldl will work for your 7060 as i belive that to be a 8192 baud rate ecm. you might have to switch and try tunerpro or something else... hope i'm right on this and that it helps.
Last edited by xtreamvette69; 08-17-2013 at 03:25 AM.
WinALDL does not work with the 7060 computer.
TunerPro RT works very good with the 7060 computer. http://www.gearhead-efi.com/Fuel-Inj...Information-85
dave w
I don't beleive WinALDL will do that PCM? It's been so long since I've used it Im not sure.
But there is a much better option! TunerPro RT and the files for your data logging and bin editing are here:
http://www.gearhead-efi.com/Fuel-Inj...Information-85
TunerPro RT introduction Tutorial here:
http://www.gearhead-efi.com/Fuel-Inj...-a-must-read!-)
Cable installation here:
http://www.gearhead-efi.com/Fuel-Inj...to-TunerPro-RT
HTH!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks guys, I'll look at the rt software in a bit.
Bookmarks