Results 1 to 9 of 9

Thread: Lextech truck and Vortec to 0411 Swap now famous!

  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    Lextech truck and Vortec to 0411 Swap now famous!

    For anyone living under a rock and does not know about Lextech 0411 swap in a Vortec... well he's now in a published book with pictures of his twin turbo 1998 Chevy truck!

    http://www.gearhead-efi.com/Fuel-Inj...iew-How-to-Use

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Thanks Mark.
    I am definitely not famous. Maybe--A Legend in my own mind. Mike Noonan, the owner of EFIConnection called me about 14 months ago and said he was in the beginning stages of writing a fuel injection book. He said he thought that my truck would exactly fit the theme of the book and asked what I thought about it being in his book. I never expected anything like that. I, of course said yes. I supplied him with as much info on it as I could and he thinned out that info and wrote it up. I supplied the pics. The book is VERY well thought out and has a ton of good info in it. Mike and I have become friends over the past several years. I hope he sells a ton of them.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I'm still skimming through and yes it's a good book! I'd like it even if your truck was not in it!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by EagleMark View Post
    I'm still skimming through and yes it's a good book! I'd like it even if your truck was not in it!
    Melding of the 0411 minds in here, lol! Might have to add that into my collection.

    With all this collective knowledge, any input on Tow/Haulass integration on a 97? Single switch and what PCM Pin? Any way to add a light?

  5. #5
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Quote Originally Posted by Fast355 View Post
    Any input on Tow/Haulass integration on a 97? Single switch and what PCM Pin? Any way to add a light?
    With the 0411 swap you can easily add T/H mode. There is no indicator light for T/H mode on the GMT400 truck. You give a single PCM pin a MOMENTARY Ground to engage T/H. If you press the button again or cycle the key, T/H is cancelled.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  6. #6
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by Lextech View Post
    With the 0411 swap you can easily add T/H mode. There is no indicator light for T/H mode on the GMT400 truck. You give a single PCM pin a MOMENTARY Ground to engage T/H. If you press the button again or cycle the key, T/H is cancelled.

    Jeff
    Well its not GMT400 its a GMT600 but I think it should work the same way. Did the indicator light work off serial data or is it a pcm output?

  7. #7
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Quote Originally Posted by Fast355 View Post
    Did the indicator light work off serial data or is it a pcm output?
    The Body Control Module turned on the light in the cluster. I have never looked into how it is turned on.
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  8. #8
    Fuel Injected!
    Join Date
    May 2013
    Posts
    174
    I bought the book the other day, lots of good info inside!

    also, might be able to use the "shift light" output to control the t/h light.

  9. #9
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    Who is Lextech, and what the heck is a 411 PCM? Does that PCM give you some sort of information display?





    Lextech's truck is killer, exactly setup the way I would want it, the S60 top it off.

    I always wondered about simply cycling the key, momentary ground switch out of a GMT360 (Trailblazer should work, or the T/H button out of an earlier Blazer.

    peace
    Hog

Similar Threads

  1. 1996 - 2000 Vortec Black Box to LS 0411 swap
    By EagleMark in forum OBDII Tuning
    Replies: 6
    Last Post: 03-17-2023, 08:58 AM
  2. 1996 to 2000 Chevy Vortec Truck PCM Tuning.
    By EagleMark in forum EFI Tune
    Replies: 4
    Last Post: 12-14-2015, 07:25 AM
  3. Vortec to 0411 swap and info thread!
    By EagleMark in forum OBDII Tuning
    Replies: 22
    Last Post: 06-20-2013, 03:37 AM
  4. Cammed L31 Vortec tuned with 0411 and HP Tuners........
    By Fast355 in forum GM EFI Systems
    Replies: 4
    Last Post: 03-29-2013, 08:09 AM
  5. 94 C1500 4.3 to L31 350 vortec swap
    By jbrenneman13 in forum GM EFI Systems
    Replies: 21
    Last Post: 03-20-2013, 05:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •