starter bin

[ony]

here is a good starter bin for a 4.3 standard trans,5 speed 16144288 without a cat on it, it can be improve on alot the arf ratio vs temp needs to be about 15.0 at 180 f an let it idel in open loop. i loaded the wrong bin,this is a syncr bin that has egr an shift light issues, here is the bin i meant to load its asyn but not at idle, thought some of the 4,3 jeep guys that have a 288 ecm might like it.

[ony]

here is a adx file with a modified dash and a blm history table and a data log. kindof interesting it idels open loop and in synco mode, push the gas alittle it goes asyn

[EagleMark]

Haven't looked at the entire log but looks to be Async at highway speed and kicking in and out before that?

$A0 does not look like much different the $42, can't see putting a lot of work into the XDF, but there is a dissasembly. Why are you trying this?

[xtreamvette69]

why did the chicken cross the road

[EagleMark]

ony is bored?

[ony]

I am just pitlying,

[ony]

that awks is a good bin, its not curupt, if you were running a cat you would want to change the open loop vs temp back to 13.5.