Originally Posted by
EagleMark
You need a set of 80 lb/hr BBC injectors, adjustable regulator and a good gauge to set fuel pressure. Stock pump in tank will not do, need a TPI pump from 90 Camaro or 96-97 Vortec truck pump. They look identical and will bolt in, just way more volume and capable of more pressure.
At minimum you are going to need a cable to hook up to ALDL port and data log with a lap top after a starter chip. (Should also have a Wide Band O2 Sensor.)
You have quite a few bucks in this build and don't know what's left in your budget? But a wide Band O2 sensor is something that would go well with this engine/type vehicle to keep an eye on things as well as a good tool for tuning. A Ostrich Emulator or AutoProm for future tuning if you want to get into that?
Bookmarks