I should have been more specific and said using the 0411 PCM.
I should have been more specific and said using the 0411 PCM.
With those being DIS, there is definately a crank trigger wheel made for them. The only problem I see would be getting the 411 to work with that trigger wheel.
I'm thinking 4.3 bin from the 01-02 range (for a 411 pcm) would probably be way different than a bin for the same year V8 with DIS. So I am wondering if it would be easyer to mod a V8 bin, and alter the number of cylinders it fires and the number of pulses it see from the crank trigger, than it would be to try and make a distributor bin work with dis?
However it goes, it would take someone way smarter than me to do it.
Last edited by JeepsAndGuns; 08-08-2013 at 02:32 AM.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
Hog always has the sexy pictures!
Somewhere we talked about this before to run COP with the 5.7L Vortec engine (96,97,98,99,00) 0411 conversion.
In EFI Live and TunerCat there are Vehicle Platform Options and the LS engine like Camaro and newer Trucks have Low Res Crank marked No. The Vortec calibration that comes with distributor is marked Yes!
Just not sure what the Low Res Option is for?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I guess the answer is in the new book?
http://www.eficonnection.com/eficonn...px?ItemId=1240the different ignition systems (with high and low resolution crank/cam signals)
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I just ordered the book, probably a good read even if it doesn't outline what I need to know.
thoughts?
I looked at which injector pins went to what cylinders between the two pinouts, and then match the coils.
blue 2002 S-10 4.3 Typical V8 0411 Coil per cylinder 4.3? 1 ground ground ground 2 12v ref 12V reference 12v ref 3 - Fuel injector #3 - 4 Fuel injector #4 Fuel injector #2 Fuel injector #4 5 - - - 6 - - - 7 - - - 8 5v ref - 5v ref 9 Knock sensor signal - Knock sensor signal 10 - - - 11 - KS #2 signal - 12 Crank pos signal Crank position signal Crank pos signal 13 - Requested torque signal - 14 - UART serial data secondary - 15 - UART serial data tertiary - 16 - - - 17 Trans fluid pressure switch signal B Trans fluid pressure switch signal B Trans fluid pressure switch signal B 18 Trans fluid pressure switch signal C Trans fluid pressure switch signal C Trans fluid pressure switch signal C 19 IGN+ IGN+ IGN+ 20 B+ B+ B+ 21 Low ref Low ref Low ref 22 - - - 23 Low ref Low ref Low ref 24 - - - 25 HO2S low bank2 sensor 1 HO2S low bank2 sensor 1 HO2S low bank2 sensor 1 26 HO2S low bank2 sensor 2 HO2S low bank2 sensor 2 HO2S low bank2 sensor 2 27 - - - 28 HO2S low signal bank 1 sensor 2 HO2S low signal bank 1 sensor 2 HO2S low signal bank 1 sensor 2 29 HO2S low signal bank 1 sensor 1 HO2S low signal bank 1 sensor 1 HO2S low signal bank 1 sensor 1 30 Coolant level switch signal Coolant level switch signal Coolant level switch signal 31 - - - 32 Transmission range signal A Transmission range signal A Transmission range signal A 33 TCC brake switch signal TCC brake switch signal TCC brake switch signal 34 Transmission range switch signal P Transmission range switch signal P Transmission range switch signal P 35 CPP switch signal CPP switch signal CPP switch signal 36 Fuel injector #1 Fuel injector #1 Fuel injector #1 37 Fuel injector #3 Fuel injector #6 Fuel injector #3 38 - Damping lift/dive signal - 39 - - - 40 ground ground ground 41 - Low ref - 42 - - - 43 Fuel injector #5 Fuel injector #7 Fuel injector #5 44 - Fuel injector #5 - 45 - FTP 5V ref - 46 5v ref TPS 5V ref 5v ref 47 - MAP 5V ref - 48 5v ref EGR 5V ref 5v ref 49 Low ref - Low ref 50 - - - 51 - KS bank 1 signal - 52 - - - 53 Low ref (RPO M30 only) Low reference Low ref (RPO M30 only) 54 Low ref Low reference Low ref 55 - EGR valve position signal - 56 - - - 57 B+ B+ B+ 58 Class II serial Class II serial Class II serial 59 Class II serial Class II serial Class II serial 60 Low ref Low ref Low ref 61 Low ref Low ref Low ref 62 - - - 63 HO2S low ref Low ref HO2S low ref 64 - - - 65 - HO2S high signal bank 2 sensor 2 - 66 HO2S High signal HO2S high signal bank 2 sensor 1 HO2S High signal 67 - - - 68 HO2S high signal HO2S high signal bank 1 sensor 2 HO2S high signal 69 HO2S high signal HO2S high signal bank 1 sensor 1 HO2S high signal 70 - Oil level switch - 71 - - - 72 Trans range switch signal B Trans range switch signal B Trans range switch signal B 73 Cam position signal Cam position signal Cam position signal 74 ECT signal ECT signal ECT signal 75 B+(RPO M30 only) B+ B+(RPO M30 only) 76 Fuel injector #3 Fuel injector #5 Fuel injector #3 77 Fuel injector #6 Fuel injector #8 Fuel injector #6 78 - - - 79 3-2 shift solenoid control 3-2 shift solenoid control 3-2 shift solenoid control 80 Low ref Low ref Low ref
Red 2002 S-10 4.3 Typical V8 0411 2002 S-10 4.3 1 Ground Ground Ground 2 TCC PWM solenoid control TCC PWM solenoid control TCC PWM solenoid control 3 - Secondary fuel pump relay control - 4 - - - 5 - Delivered torque signal - 6 PC solenoid high control (A) PC solenoid high control (A) PC solenoid high control (A) 7 - EGR supply voltage - 8 PC solenoid low control(A) PC solenoid low control(A) PC solenoid low control(A) 9 Primary fuel pump relay control Primary fuel pump relay control Primary fuel pump relay control 10 Engine speed signal Engine speed signal Engine speed signal 11 - AC high pressure recirc switch signal - 12 - - - 13 Cruise status Cruise status Cruise status 14 - - - 15 Generator turn on signal Charge indicator control Generator turn on signal 16 4wd low signal 4wd low signal 4wd low signal 17 AC request AC request AC request 18 - - - 19 Axle switch signal Axle switch signal Axle switch signal 20 VSS low VSS low VSS low 21 VSS high VSS high VSS high 22 - ISS high - 23 - ISS low - 24 TPS signal - TPS signal 25 IAT signal IAT signal IAT signal 26 IC timing signal Coil 1 control Coil 1 control 27 - Coil 7 control Coil 5 control 28 -- Coil 6 control Coil 3 control 29 - Coil 4 control Coil 2 control 30 - - - 31 MAF signal MAF signal MAF signal 32 MAP signal MAP signal MAP signal 33 - Recirc actuator control - 34 EVAP purge control EVAP purge control EVAP purge control 35 - - - 36 - AIR pump relay - 37 - - - 38 - - - 39 12V ref 12V ref 12V ref 40 ground ground ground 41 - EGR solenoid control - 42 TCC solenoid control TCC solenoid control TCC solenoid control 43 AC relay control AC relay control AC relay control 44 - - - 45 EVAP vent control EVAP vent control EVAP vent control 46 SES light SES light SES light 47 2-3 shift solenoid 2-3 shift solenoid 2-3 shift solenoid 48 1-2 shift solenoid 1-2 shift solenoid 1-2 shift solenoid 49 Vehicle speed signal Vehicle speed signal Vehicle speed signal 50 VSS signal VSS signal VSS signal 51 Trans fluid temp signal Trans fluid temp signal Trans fluid temp signal 52 Generator field duty cycle signal Generator field duty cycle signal Generator field duty cycle signal 53 - - - 54 Low ref Fuel level signal(primary) Low ref 55 AC low pressure switch signal AC low pressure switch signal AC low pressure switch signal 56 - - - 57 Low ref Low ref Low ref 58 - - - 59 - - - 60 - Low ref - 61 - Low ref - 62 Trans range switch signal C Trans range switch signal C Trans range switch signal C 63 Trans pressure switch signal A Trans pressure switch signal A Trans pressure switch signal A 64 STP pressure signal STP pressure signal STP pressure signal 65 - - - 66 - Coil 8 control Coil 6 control 67 - Coil 2 control - 68 - Coil 5 control Coil 3 control 69 - Coil 3 control - 70 - - - 71 - - - 72 HO2S heater low control bank 2 sensor 1 HO2S heater low control bank 2 sensor 1 HO2S heater low control bank 2 sensor 1 73 - Fuel level signal (secondary) - 74 HO2S heater high control bank 2 sensor 1 HO2S heater high control bank 2 sensor 1 HO2S heater high control bank 2 sensor 1 75 - - - 76 IAC coil B high control IAC coil B high control IAC coil B high control 77 IAC coil B low control IAC coil B low control IAC coil B low control 78 IAC coil A low control IAC coil A low control IAC coil A low control 79 IAC coil A high control IAC coil A high control IAC coil A high control 80 HO2S heater low ref Low ref HO2S heater low ref
Last edited by ericjon262; 08-10-2013 at 03:29 AM.
Sure looks like a good start! My concern would be the code, not sure the vehicle platform change is going to work? This is new ground. Would be nice to have a test bench for this but then again you'll have a test bench when installed in the truck...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Bookmarks