Page 3 of 8 FirstFirst 12345678 LastLast
Results 31 to 45 of 119

Thread: LS1 Flash Tool Released

  1. #31
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    Okay,finally got a chance to try it out.
    No issues on an 0411,a V6 pcm didn't unlock but did read cal/OS info iirc.
    I did want to post up that this will not work using an AVT-838 though.
    I got my AVT boxes mixed up,really wanted to keep my old serial box hooked up to my shop computer/bench harness.
    But the old box wouldn't reset/initialize using this tool.
    The new USB 85x box hooked right up and no issues though.

    I still have a couple pcm's to run through,and i'll post up the info from them as well as the V6 pcm that didn't work.
    (it's one of the bastard 98's)

  2. #32
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Ive updated to v1.03, added some more duramax osids, fixed the user key function, and fixed the handling of a seed response asking the tool too delay and retry.
    Theres not much I can do to support the AVT-838 as I dont have one and I cant justify the time it'll take, sorry.

  3. #33
    Fuel Injected! T-Rex's Avatar
    Join Date
    Feb 2013
    Posts
    49
    A tool that would allow you to edit the CVNs back to stock would be awesome.

  4. #34
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    If you mean something that can fudge the tune to make the data match the original checksum, then sorry no. A flash tool should not edit the tune, only read and write what you supply.

  5. #35
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    v1.04 has been released. A few fixes for LB7 duramax.

  6. #36
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    49
    Posts
    132
    Quote Originally Posted by antus View Post
    thanks, will have a look at it.

    Have released V1.02, with support for 1MB PCMs. Testing reports welcome.
    Excellent. Will update shortly.

  7. #37
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Quote Originally Posted by Lextech View Post
    I updated to V1.02 and just read a 2007 LS1b 1mb PCM. Works PERFECT. Thank you for the update and the SEED/KEY addition.

    Jeff
    I may have spoke too soon. I tried to open that bin in Tunercat and EFILive and HPTuners and it won't open---says it is corrupt. So, I read the same PCM out in Tunercat and saved it as .bin. Then I opened it in HexWorkshop and did a compare. The LS1Flash bin only went up to address 80000
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  8. #38
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Whats the OSID and the Service number of that pcm? I added the OSIDs for the 1Mb PCMs that I knew about but it looks like there are more to add.

  9. #39
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Quote Originally Posted by antus View Post
    Whats the OSID and the Service number of that pcm? I added the OSIDs for the 1Mb PCMs that I knew about but it looks like there are more to add.
    It is a 2004 calibration with OSID# 12587603. I didn't make the last post as a complaint. I am very excited about your Flash Tool.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  10. #40
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Ok thanks for that. Appreciate the info, I dont have one of those PCMs so its your report that gets it added. Ive attached a 1.05 beta to this post (will remove it later). It has that pcm type included as a 1Mb, if you can test and let me know that would be great.

    Write is still progressing, too, and things are looking good.

    edit: beta removed
    Last edited by antus; 08-05-2013 at 10:35 AM.

  11. #41
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    I just tried to read with V1.05. When I click on "Identify PCM" I get an error message "Failed to Read Block10"
    Here is the .bin from that PCM read out with Tunercat. It is a 2007 PCM #12602801 with a 2004 calibration OSID #12587603

    Jeff
    Attached Files Attached Files
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  12. #42
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Is the connection to the pcm ok, ignition power on? Thats what it'll say if it can talk to the avt but the pcm isnt replying (block 10 is the first thing it tries to read).

  13. #43
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    I just got into work. I won't be able to check it for about 10 hrs. I will try it again tonight.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  14. #44
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    V1.05 works great. The problem was on my end----Sorry about that. I did have a bad connection. A connector was not fully seated.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  15. #45
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    Excellent, thanks for the report

    I think I might add a usability tweak and put an error about check your connections in, instead of just "failed to read block 10" which is not so clear.

Similar Threads

  1. Open source GM OBD2 flash tool using a ELM327 device
    By EagleMark in forum OBDII Tuning
    Replies: 1
    Last Post: 06-22-2013, 02:00 AM
  2. Flash Based GM ECM Products
    By RBob in forum Dynamic EFI
    Replies: 10
    Last Post: 02-03-2013, 07:50 PM
  3. Memcal Flash Tool
    By EagleMark in forum GM EFI Systems
    Replies: 6
    Last Post: 01-22-2013, 05:26 AM
  4. Exporting Difference Tool listing
    By belaw in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 08-04-2012, 04:44 PM
  5. TunerPro Rt used as a scan tool?
    By mudbuggy in forum TunerPro Tuning Talk
    Replies: 21
    Last Post: 01-10-2012, 03:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •