Page 2 of 2 FirstFirst 12
Results 16 to 25 of 25

Thread: 94 lt1 corvette pcm 16181333 first time

  1. #16
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    Quote Originally Posted by steveo View Post
    what ADX file are you using?
    Hi Steveo -

    I'm using the one in the post I quoted (post #11 by EagleMark):

    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post25492

  2. #17
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    So I deleted ALL the adx files that were in my ALDL/adx directory and put in just the $EE-16188051-Y-body-V3.8.adx file and set that as my data stream file. Here's the log. Still telling me no response from ECU along the bottom of the screen and most of the gauges aren't moving at all. It looks like the F4 problem is now getting replaced with F1 (as you mentioned) but every line seems to report an incorrect response length.

    I have no idea what to do at this point.
    Attached Files Attached Files

  3. #18
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by Drew95 View Post
    Hey all -

    N00b here and I realize this is a REALLY old thread, but I'm hoping someone is still around who can help me out.

    I have a 95 Vette that is using the stock PCM, but it's had a custom tune put it in to fit all my mods (LT4 396 stroker, 42lb injectors, 4.10 rear, ZF-6, C5 wheels, etc. etc.). My issue is I'm trying to use the ALDL Bluetooth kit from Red Devil River with ALDLDroid. Has anyone tried this? I get SOME readouts that are right on the $ (mainly temp gauges like Coolant and oil - they match my cluster readout perfectly), but other things like RPM, MPH, Engine/Trans Data etc. either completely wig out or don't even budge. I have a constant red bar along the bottom that mentions checksum errors. Disabling checksum verification has no effect. Same with disable hardware acceleration.

    I've attached the debug log just in case.

    Thanks in advance for any help!

    Drew
    need to edit the adx and change the pause command timeout to 65ms

    pause.JPG
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  4. #19
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    what if you just unplug the CCM, what good does it do anyway?

    does it still retain functionality when disconnected from the bus?

    how about hacking a switch into its aldl wire for when logging is taking place?

    just throwing it out there

  5. #20
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    Quote Originally Posted by steveo View Post
    what if you just unplug the CCM, what good does it do anyway?

    does it still retain functionality when disconnected from the bus?

    how about hacking a switch into its aldl wire for when logging is taking place?

    just throwing it out there
    Jesus - I don't know if I'm comfortable with all that. I just got this car back after a year and could've bought C5 for what I put into the engine! Any of you guys in the PA/NJ area?

  6. #21
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    Quote Originally Posted by jthompson122183 View Post
    need to edit the adx and change the pause command timeout to 65ms

    pause.JPG
    Can I make that edit with a text editor? It looks like you're using an app in your attached pic.

  7. #22

  8. #23
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    Quote Originally Posted by steveo View Post
    that's just tunerpro.

    tunerpro adx and xdf files are constructed and edited in tunerpro

    aquisition menu > edit definition
    10-4; thanks Steveo.

    I just pulled it out of the garage again - I think the attached file is the correct one but something is just off. Not sure if the tune I had done would effect or not. Checksum errors over and over. i.e. - ("Incorrect response length, expected 69 but got 26, expected 69 but got 35, expected 69 but got 36").

    I attached latest log and the file I'm using. I DO have TunerPro but not sure what to do to correct. Would anyone be interested in a bounty to work on this for me?

    I really want to get this working.

    Thanks,
    Drew
    Attached Files Attached Files

  9. #24
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    Quote Originally Posted by Drew95 View Post
    I really want to get this working.
    give this a go.
    Attached Files Attached Files
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  10. #25
    Carb and Points!
    Join Date
    Apr 2018
    Posts
    8
    Quote Originally Posted by jthompson122183 View Post
    give this a go.
    Ok - Now we're getting somewhere! It actually worked for a few minutes (all gauges) and with no checksum errors, but they came back. Some of the gauges are working, but other stopped. Here's the log of that.
    Attached Files Attached Files

Similar Threads

  1. 16188051 and 16181333 PCM Information $EE $EEB
    By EagleMark in forum GM ECM - Bins - TunerPro Definition Files - Wiring Diagrams - Tuner Info!
    Replies: 13
    Last Post: 10-05-2014, 08:42 PM
  2. Old Corvette guy, New Guy
    By Bguzz in forum Introductions
    Replies: 6
    Last Post: 04-19-2013, 05:58 AM
  3. 95 Corvette 16181333 ECM Fan control
    By Oysteinbno in forum TunerPro Tuning Talk
    Replies: 39
    Last Post: 09-15-2012, 12:37 AM
  4. Corvette 6E bin with 4+3 transmission(1987)
    By gta324 in forum GM EFI Systems
    Replies: 23
    Last Post: 09-14-2012, 04:10 PM
  5. Knock Sensor pictures of LT1 16188051 and 16181333
    By EagleMark in forum GM EFI Systems
    Replies: 11
    Last Post: 02-08-2012, 07:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •