Hi Steveo -
I'm using the one in the post I quoted (post #11 by EagleMark):
http://www.gearhead-efi.com/Fuel-Inj...ll=1#post25492
Hi Steveo -
I'm using the one in the post I quoted (post #11 by EagleMark):
http://www.gearhead-efi.com/Fuel-Inj...ll=1#post25492
So I deleted ALL the adx files that were in my ALDL/adx directory and put in just the $EE-16188051-Y-body-V3.8.adx file and set that as my data stream file. Here's the log. Still telling me no response from ECU along the bottom of the screen and most of the gauges aren't moving at all. It looks like the F4 problem is now getting replaced with F1 (as you mentioned) but every line seems to report an incorrect response length.
I have no idea what to do at this point.
need to edit the adx and change the pause command timeout to 65ms
pause.JPG
97z28 A4 obd1 swap(16188051)
Tunerpro Newbie
what if you just unplug the CCM, what good does it do anyway?
does it still retain functionality when disconnected from the bus?
how about hacking a switch into its aldl wire for when logging is taking place?
just throwing it out there
that's just tunerpro.
tunerpro adx and xdf files are constructed and edited in tunerpro
aquisition menu > edit definition
10-4; thanks Steveo.
I just pulled it out of the garage again - I think the attached file is the correct one but something is just off. Not sure if the tune I had done would effect or not. Checksum errors over and over. i.e. - ("Incorrect response length, expected 69 but got 26, expected 69 but got 35, expected 69 but got 36").
I attached latest log and the file I'm using. I DO have TunerPro but not sure what to do to correct. Would anyone be interested in a bounty to work on this for me?
I really want to get this working.
Thanks,
Drew
Bookmarks