There's a ton of OBDII files I have not checked or titled properly here:
http://www.gearhead-efi.com/gearhead-efi/OBDII/
There's a ton of OBDII files I have not checked or titled properly here:
http://www.gearhead-efi.com/gearhead-efi/OBDII/
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks! That was very helpful. I was able to find some LM7 files with the same OS as my LR4 MT file and then also found a 2006 L33 file (different OS) and was able to compare to an LM7 and then export/import the tables that were different.
Now I just need to figure out the injectors (from LS1/LS6) and I should be really close to stock (LS1 intake manifold, LS3 exhaust manifolds & custom CAI). Then we'll log some data and see where we are at.
If all goes well, I should have a good 2006 L33 MT file for anyone else that might need it. I posted a pic of our project. It is my son's '85 RX7.
Anyway, thanks again for all of the help.
Todd20130629_220614.jpg
really old thread... but thought I would post that I have a 2006 Chevy 2500 HD with a 6.0 and NV4500 manual trans. The OS is 12587811 and I have the xdf for it if needed.
I can't upload files, so here's a shared file link https://drive.google.com/file/d/1zq1...ew?usp=sharing
Maybe someone can download it and upload it back?
What I don't see in the xdf is the VATS, maybe it's called something else?
Looks like it's called VTD in this version of the OS / XDF . I'm going to try changing the parameters and writing the PCM.
Bookmarks