Results 1 to 3 of 3

Thread: 8.1 with cable TB file request

  1. #1
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445

    8.1 with cable TB file request

    Hey guy's,having a hard time finding an application that used an 8.1 with a cable throttle.
    Was there one? Did the marine applications use one?
    Anyway,if anybody has an 8.1/cable .bin/.cal/.tun than I could use it for a starter.
    Application is a 2001 with 4L80E swapped to replace the allison,but used a 6.0 harness/cable/pedal to do it.
    I segment swapped the 4L80E in,but wasn't told about the TB swap.
    Would rather start with a factory cal than adjust the 6.0,but if I gotta than I gotta.
    Can't find alot of info on it,i've only messed with a few.

  2. #2
    Far as I know all 8.1s are drive by wire. Every one I have done I started with a 5.3 or 6.0 and modified for 8.1 then segment swapped for trans.

  3. #3
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    With the time it took searching I could have put one together lol.
    But needed to refresh on them anyway,been a few years since i've messed with one.
    Thanks for info.

Similar Threads

  1. File Request
    By MYLTWON in forum OBDII Tuning
    Replies: 4
    Last Post: 07-17-2013, 07:13 PM
  2. bin file request
    By ericjon262 in forum OBDII Tuning
    Replies: 3
    Last Post: 05-16-2013, 04:45 AM
  3. File request
    By roughneck427 in forum OBDII Tuning
    Replies: 7
    Last Post: 04-23-2013, 07:28 AM
  4. File request
    By Playtoy_18 in forum OBDII Tuning
    Replies: 14
    Last Post: 03-13-2013, 07:11 AM
  5. File Request.
    By Hog in forum OBDII Tuning
    Replies: 8
    Last Post: 03-04-2013, 01:49 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •