"BFXB" 1991 ZR1 stock bin.
The Target RPMs table has:
Deg C RPM -40 05 -28 03 -16 03 -4 59 8 1B 20 08 32 02 44 00 56 38 68 68 80 60 .. .. 152 60
What do those hex values in the RPM column indicate - IAC counts, tach speed?
"BFXB" 1991 ZR1 stock bin.
The Target RPMs table has:
Deg C RPM -40 05 -28 03 -16 03 -4 59 8 1B 20 08 32 02 44 00 56 38 68 68 80 60 .. .. 152 60
What do those hex values in the RPM column indicate - IAC counts, tach speed?
SHould be RPM. Looks like the XDF/Mask is not set right. Post up the xdf file.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
XDF currently in use
$8E is for a 1990 Corvette ZR1 with LT5 engine
Your BFXB is for a 1991 Corvette ZR1 with LT5 engine and $AF.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Mark ... its been an unbelievably lousy day for me, but you just saved it. thanks man.
I am comparing the stock BFXB with a custom bin using TPRO5. Strange, the Max Allowable BLM in BFXB is 160 which seems normal, but the custom bin has it at 5. The Min Allowable is 115, but the custom min is 60.
How can the max be less than the min as in the custom? Why? Thanks for the help, still learning.
Posting Permissions
Reply With Quote
Bookmarks