Can I read airbag codes with laptop?

[EagleMark]

That one is a no go as well. Same problem. I see the commands but I don't have a clue what I'm looking at.

It takes many hours of reading and practice to make these work.

I got it to do something but running them all "mode 8 - disable comms macro" but it does not appear to be stable as the connection tab blinks in between DA: Connected and data error.

You must be really bored to want and look at ABS data and codes?

I added ABS to the already working $EE-16188051-V.xx adx

Since you now know how to change connections you need to test ABS, it's set right now for ABS. Then need to check for Engine, then trans to see if I screwed anything up? Each time the engine must be running to connect, then turned off and restarted to connect to another because I don't have Disable Mode 9 commands in place.

[fuzzcar]

I don't have any issues with the ABS, but ultimately I would like to be able to read those too. What's annoying me is the airbag light is on and I want to figure out the issue. I got it to read code 17 which is open circuit on the passenger side. So maybe I accidentally left a connector unplugged when I put the dash back together. Its really easy for me to mess with this because I have wifi service at my car, so I can read, play with stuff, read, download, try again. etc.

[EagleMark]

So does it work?

[fuzzcar]

Messing around with only the ABS portion of it so far. The way you had it setup (Connection and Monitor command both on "ABS connection") it wasn't doing anything. I fiddled around with those settings trying them in different combinations and so far the only way I got it to do anything (besides the randomly crazy varying data) was with Connection: ABS Reply Monitor: ABS Send. It's showing that my airbag light is on but the seatbelt buckle flag does not seem to be working even though the seatbelt dash light does work.

[fuzzcar]

Scratch that. That is not reliable either, everytime you disconnect and reconnect you get different readings and codes. It probably does not help that I barely know what I'm doing.