Ran across some old discussions/threads about it on thirdgen sounds like a nice set-up.
Curious if anyone out there is currently using or did use the code on a TBI?
Ran across some old discussions/threads about it on thirdgen sounds like a nice set-up.
Curious if anyone out there is currently using or did use the code on a TBI?
Would you recommend it?
My '88 Jeep w/ AMC 360 is $OE(7427) TBI and runs really good, but I like to play with this stuff.
Many years ago I helped a buddy convert from SD to MAF on a 5.0 Mustang.
Couple weeks after that I helped him install heads & a cam, and the thing really woke up.
I was impressed with how well it adapted itself and it was a blast to drive afterwards.
Or should I just keep hiding my pennies for the eventual LSx/4L80E swap.
Tony
'88 Jeep Grand Wagoneer (aka Babywag)
'67 Jeep J3000
'07 Dodge Magnum SRT8
Ya know, I was poking around my computer and found a 0D MAF zip file with a bunch of info in it. It has kinda made me a little curious. The way I have my air intake set up, adding a MAF would be pretty easy. I have almost been tempted to try it, but would need to be able to have someone who has done it help me with making the bin and tuning it. As well as explain the way it works and answer my questions.
I am currently running the PFI mod on mine.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
Well I ordered a MAF from eBay today for $22.50
I have 14 days to verify it's good, so that's some motivation @ least.
I tracked down a bin, and tested it out, the truck started and ran decent even without the MAF.
Shouldn't be too hard to add a MAF + wiring to my CAI.
But, like your comments above will need some info on the .bin and what to change.
I found the injector flow I believe it was 10.2 and I changed it to 7.69.
Also pasted my VE tables & spark tables in.
Hopefully the JTR VSS will work?
Or, there seems to be a parameter for the GM VSS that can be changed.
So maybe even the Jeep 8k cruise VSS could be made to work?
Tony
'88 Jeep Grand Wagoneer (aka Babywag)
'67 Jeep J3000
'07 Dodge Magnum SRT8
Bookmarks