Doesn't matter what I try, random knock counts upon communication connection.

[damanx]

I've tried everything. It's gotten to a point where I'm going to ignore the knock counts.

Only problem is that I am not sure that the knock counts that show up are random or stored in the ecm.

In any case, the counts don't increase as I am driving.

[RobertISaar]

is this before or after cranking the engine?

[damanx]

It occurs before start up, after start up, before warm up, after warm up, it really doesn't seem to matter when I connect and start tuner, it occurs.

[EagleMark]

It's an accumulator, there will always be knock counts. The only way to find knock in this ECM is to watch data and see knock counts increase.

Your still running the bin I gave you? It has the forced knock ESC test done, so it will not force knock at WOT PE as a test either.

[damanx]

Yes, still running that bin.

[EagleMark]

In all your logs I've seen I've never seen knock occur. As I said it will always have a number, don't worry about it unless the number is moving/increasing!

[damanx]

Thanks Mark!

Just did not want to worry about adjusting something that was not an issue.