Ill get data log when i get home later.
Made this short run for warm up and idle at the end. AE keeps going active at idle, I did raise the map difference with no luck need to try something different. Open throttle VE tables still off a lot too.
Attached is my VE summary for the 4.xdl file.
My spreadsheet filters the near idle data when the idle flag is active, it also filters out AE, PE, and Open Loop data. TunerPro RT history tables do not filter the data like my spreadsheet.
Overall the tune in rich. One option would be increase the injector flow which will LEAN all VE Cells, both near and off idle. I would increase the injector flow in 1 lb increments, until the VE data showed some rich / some lean BLM's. I would then fix the VE table with the attached spreadsheet.
dave w
Do these tools work for any mask or just the TBI masks?
Thanks ill give tjat a try, speaking of that I tried to see what my injector size was but could not make out any numbers or colors other then the orange insulators on the pins. My bin is set for 61 lb/hr as of right now, ill try increasing. Also is o2 data bouncing normal?
Is there one of those spreadsheets for the 7730. I looked on several threads but didn't see any. I smoothed me ve tables and went and datalogger a short trip with ALDLDROID. My BLM is all over the place. Trying to figure out how to make the changes I need.
Bookmarks