Thanks ill give tjat a try, speaking of that I tried to see what my injector size was but could not make out any numbers or colors other then the orange insulators on the pins. My bin is set for 61 lb/hr as of right now, ill try increasing. Also is o2 data bouncing normal?
Is there one of those spreadsheets for the 7730. I looked on several threads but didn't see any. I smoothed me ve tables and went and datalogger a short trip with ALDLDROID. My BLM is all over the place. Trying to figure out how to make the changes I need.
The attached spreadsheet is what I use for $8D. The spreadsheet IS NOT Microsoft Excel beginning user friendly!
After "crunching" the data log with the Analyzer spreadsheet, I use the $8D VE Fixer spreadsheet.
Pay close attention to 1600 RPM's VE values, they are shared in both lower and upper tables and must match!! Interpolate the 1600 RPM valves not shared in the lower VE table.
The attached Excel spreadsheet will not work with Open Office.
Cant seem to get it to work on my tablet either. Is there a file for it I can download on my tablet and transfer to my computer. I have no internet for my computer.
Do you have Microsoft Excel? You need it and the attached spreadsheet above
Yeah I pretty sure I have excel. But when I click on the spreadsheet attached it only shows me a bigger picture. Can't seem to download it. Also I'm using $A1 mask. Will it even work for me.
My off idle history table goes by 5s all the way across and the spreadsheet goes by 5s and 10s, I know i can copy and paste them in the right place but was wondering if there is another correction table to match or if i could find the complete factor to make one?
Maybe the spreadsheet I have in this thread will help? I think you can modify the tables to match $A1. Excel is doing the math, you can change the RPM's and Kpa's to match $A1 and delete the cells you don't need.