Yeah I pretty sure I have excel. But when I click on the spreadsheet attached it only shows me a bigger picture. Can't seem to download it. Also I'm using $A1 mask. Will it even work for me.
Yeah I pretty sure I have excel. But when I click on the spreadsheet attached it only shows me a bigger picture. Can't seem to download it. Also I'm using $A1 mask. Will it even work for me.
My off idle history table goes by 5s all the way across and the spreadsheet goes by 5s and 10s, I know i can copy and paste them in the right place but was wondering if there is another correction table to match or if i could find the complete factor to make one?
Maybe the spreadsheet I have in this thread will help? I think you can modify the tables to match $A1. Excel is doing the math, you can change the RPM's and Kpa's to match $A1 and delete the cells you don't need.
http://www.gearhead-efi.com/Fuel-Inj...r-Spread-Sheet
dave w
super helpful thread! I'm using this guide to adjust a bin file,to start logging data. My BURN 2 is supposed to arrive Friday!
Couple questions. I'm on $31.
AIR, I didn't think this vehicle had an AIR pump. The Min Temp for Air in my bin, is already set high to 147.5 C. Looks like I am set there.
PE disable, I changed min MPH for PE, to be really high
EGR, bumped up min MPH for EGR
I couldn't find any parameters for the other two items to disable, and I think that my bin doesn't have those features.
onto my question, I smoothed the VE table, however I don't see an option to save those new values. They stay red in the map, even when I save the bin. Is it not possible to save those?
Or do you have to smooth the table every time? Why not change the values in the table to be the smoother from the start?
Wish I could delete this last post now, as I figured it out! It appears that scalars are saved when you tell TP5 to save the bin. If you attempt to close a modified table, it prompts you to commit the changes to the current bin or not. That way you can save the changes.
Perhaps it'll help another user!
Bookmarks