Looking into adjusting the DFCO to turn on a little more often. I get the basic idea of how everything works but there are some things that are confusing. 1st off, after logging with it enabled, I saw a BPW MS drop to 0.xx at around 55mph after letting off from 70mph. I've read that the BPW MS should drop to 0 when DFCO engages. Does this 0.xx qualify for 0, or should it actually be a flat 0.00? If it doesn't qualify, is this just DE then, and not DFCO?
The other part I am confused with is why the DFCO RPM to disable, and Map to disable scalers are maxed out. RPM is at 6375 which seems to me like it would conflict with the RPM threshold table. And the Map is 99.69, which would seem to conflict with the Map threshold table.
Edit: 7747 ASDU $42
Reply With Quote
Bookmarks