Results 1 to 5 of 5

Thread: 1996 to 2000 Chevy Vortec Truck PCM Tuning.

  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    1996 to 2000 Chevy Vortec Truck PCM Tuning.

    EFI Tune in North Idaho tuning available in person or PCM can be flashed via mail. Send ne your PCM and it will be flashed on bench with information provided for your needs.

    1996, 1997 as well as the 1998 to 2000 Chevy Vortec Truck PCM Tuning. Including PCM flashed for transplanted engines.

    Custom tuning for stock, transplant, conversion or high performance built engines 1996 to 2000. Starter tunes are built for your vehicle, there are no one size fits all off shelf here.

    For further fine tuning you will need a laptop to record data. Cables are available if you want to purchase one. If you own an EFI vehicle and do your own work it's a must have. Can also provide Laptop loaded with software, cable and files for Data Logging shipped to your door ready to use. Large deposit required until returned.

    Remote Connection tuning and training is also available. With a laptop and flash cable I can tune your engine via remote access, also Dyno tunes for the shops that don't handle the early Vortec. Wireless Internet Access to tune your car live. This is also a great way to learn how to tune your vehicle and use the tuning software. We talk on phone as you watch what is done on your laptop screen.

    My Flashed PCMs come with a 30 day customer satisfaction guarantee!

    • Increased horsepower • Increased torque • Better throttle response • Increased gas mileage • Overall better drivability

    PCMs can also be flashed for Vortec Engine Transplants.


    Stay Tuned!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Electronic Ignition!
    Join Date
    Feb 2015
    Age
    62
    Posts
    12
    hello my name is joey,and I was wondering if you could help me out with tuning a 1997 5.7 l31 all stock except headers and cold air intake.this motor is in a1971 chevy c20 and needs the gear ratio and speedo change.Oh and the rear o2 deleted,also where I live there is no smog check so maybe get rid of all the emissions;the truck runs but 8-10 miles to gallon with no performance sucks. MY EMAIL is joeyzam@Hotmail.com thank you JZ.

  3. #3
    Sorry to say but Mark is no longer with us.

    There are a few of us here that would be more than happy to help you out.

  4. #4
    Fuel Injected!
    Join Date
    Oct 2012
    Posts
    59
    are you able to tune a 00 s10 2.2l 5sp ecm it has a injector driver problem
    ecm is a 16228016
    thxs

  5. #5
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,844
    Injector driver problems can not be fixed by tuning.

Similar Threads

  1. 1996 - 2000 Vortec Black Box to LS 0411 swap
    By EagleMark in forum OBDII Tuning
    Replies: 6
    Last Post: 03-17-2023, 08:58 AM
  2. 1996 TunerCat Calibration Files
    By EagleMark in forum TunerCat Calibration Files
    Replies: 9
    Last Post: 09-16-2019, 07:35 PM
  3. 1996 TunerPro Bin Files
    By EagleMark in forum TunerPro OBDII Bin Files
    Replies: 3
    Last Post: 06-05-2018, 07:20 AM
  4. 1996 1 ton TBI/Vortec 350 van BCC?
    By Hog in forum GM EFI Systems
    Replies: 5
    Last Post: 02-12-2013, 02:07 AM
  5. 1993 Chevy ½ ton Drag truck
    By 1leg in forum GM EFI Systems
    Replies: 17
    Last Post: 02-25-2012, 11:21 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •