Results 1 to 2 of 2

Thread: Looking for some Ford support 90 F250 with a 300 6

  1. #1
    EFI tuning addict 96lt4c4's Avatar
    Join Date
    Jan 2012
    Location
    Bardstown KY
    Age
    44
    Posts
    267

    Looking for some Ford support 90 F250 with a 300 6

    I have a friend that is wanting to get some more out of his old Ford truck. The strategy code on the EEC is D0X1. I would really like to help him out with this but I can not find any support for it. I have messed with an old 89 foxbody running A9L in the past. I used BE to mod the tuning then used Tunerpro to right the chip.

    He said he may want to put a Turbo on it at some point.

    The truck has really small injectors, 12 PPH. He would like to start by installing a 302 TB, and installing bigger injectors. I have some old stock LT1 injectors that he is going to try, they will be 27 PPH on the truck becasue it has almost 60 PSI on fuel pressure.


    -1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
    -2002 Cavalier, Tuned with HP Tuners
    -1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)

  2. #2
    Carb and Points!
    Join Date
    Jul 2020
    Posts
    4
    i have owned many 300s, NA you want a max of the 19 lb pph from the 302 and even then thats plenty unless he plans to rev that motor to the sky with boost, 19 will be perfectly fine, use the quarterhorse as thats your best option on that pcm, its located around the brake pedal assembly, that motor is really struggling with air, 4 pounds acts very differently than 4 pounds on a v8 like the 302, make shure you have a transmission that will handle the low end torque the motor puts out

Similar Threads

  1. Support The Forum: Buy ALDL Cables!
    By RobertISaar in forum Buy - Sell - Trade - Wanted
    Replies: 115
    Last Post: 05-26-2023, 03:20 AM
  2. Support The Forum: Buy ALDL Cables!
    By RobertISaar in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 02-13-2013, 12:47 AM
  3. Burst knock support in 7165/$6E calibration?
    By brianko in forum GM EFI Systems
    Replies: 1
    Last Post: 11-22-2012, 07:35 PM
  4. distributor for tbi on 460 ford?
    By black dawg in forum GM EFI Systems
    Replies: 10
    Last Post: 06-04-2012, 09:06 PM
  5. Ford MAF Modification
    By Lucky in forum Ford EFI Systems
    Replies: 0
    Last Post: 06-02-2011, 06:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •