Slowly getting me engine together should get short block back from machine shop next week, I did get feedback from Comp Cams, and Crane Cams; which both of them said to stick with my current cam, as I wouldn't see much of a performance gain from changing out cams. Comp did say they could make some upgrades if I didn't have emissions. This cam was suggested to me by a Cam designer which sounds like it could be an upgrade I am just worried about the dynamic CR since I make full boost around 3500 rpm.

· Duration @ .050 (Int/Exh): 216/228
· Lobe Lift (Int/Exh): .340"/.340"
· Gross Valve Lift w/1.6 (Int/Exh): .544/.544
· LSA 114
· Intake closing @.006" is 62 ABC
· Intake closing @.050" is 38 ABC
· Static CR 9:1, Dynamic CR 8.24, Dynamic w/boost CR 13.85:1
· Cranking Pressure 165 psi

What are your thoughts?