Results 1 to 10 of 10

Thread: TunerCat OBDII and WinFlash Update 3-13-13

  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    TunerCat OBDII and WinFlash Update 3-13-13

    TunerCat OBDII and WinFlash Update 3-13-13

    http://www.tunercat.com/tnr_desc/updates.html

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    Wonder what the new update fixes

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Tuner
    Version 3.31
    •Expanded the vehicle identification function to include vehicles up through 2013.
    •Add check for valid rear end ratio entry on the Speed Calibration screen.
    •Displayed accuracy of some tables has been improved.

    WInFlash
    Version 3.31
    • Added VIN change function for E37 ECMs.
    • Expanded the vehicle identification function to include vehicles up through 2013.
    • Added error message if the program can not locate the OBDII Interface.
    • Improved communication error logging.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    I can't wait to finish up some of the stuff i'm working on and concentrate more on the VDF editor and some ideas for winflash when I have time to sit and learn it.

    I checked the firmware on my avt yesterday and it is like 5-6 versions behind also.
    I haven't seen the firmware download on the avt site,anybody know where to get it?
    I think I was at .8 and current was 1.4 or 1.5

  5. #5
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    here you go
    Attached Files Attached Files

  6. #6
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    How do you check cable for firmware?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  7. #7
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    Plug cable into obd port or bench powerset click tools then check firmware version

  8. #8
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    Actually I used the terminal utility on the AVT site and queried it using instructions in manual.

  9. #9
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    49
    Posts
    132
    Quote Originally Posted by EagleMark View Post
    Tuner
    •Displayed accuracy of some tables has been improved.
    Hopefully the VE equation coefficients and idle integrator.

  10. #10
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    Winflash has new option if its a locked PCM and know key in hex will read file

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •