Results 1 to 4 of 4

Thread: Looking for a thread v.MEMCALs and knock filters, oh my.

  1. #1
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968

    Looking for a thread v.MEMCALs and knock filters, oh my.

    I recall there being a discussion on identifying knock filters and what they basic application would have been by the numbers printed on them. I can't seem to find this thread again. I can only find some discussion on identifying through resistance between two of the legs.

    I'm trying to set up a MEMCAL for a friend who is converting a friend of his firetruck to TPI. It would be nice to get the knock filter as close to proper as possible, and would like to do it by swapping a knock filter onto a MEMCAL, or finding a MEMCAL that I already have that has a good match.
    The man who says something is impossible, is usually interrupted by the man doing it.

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I have a 305 Speed Density TPI Memcal AWFY, with a knock filter code in the blue band of 1P0115. I have a picture of a 350 Speed Density TPI Memcal AUJP that has knock filter code in the blue band of 1R1045.

    HTH

    dave w

  4. #4
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    Quote Originally Posted by EagleMark View Post
    That's the one. Thanks.
    The man who says something is impossible, is usually interrupted by the man doing it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •