I have two sets of data that I collected, each running a different SA map. If I go through them and look for equal lines based on TPS and RPM, the only differences between the sets (other than SA) is the O2 Cross Counts, Injector Duty Cycle and IAC Position. Are those relevant for evaluating whether one SA map is better or worse than the other?

1227747 / $42

Set 1
TPS Voltage: 0.92
RPM: 1450
Spark Advance: 19
O2 Cross Counts: 53
MAP kPa: 58
Injector Duty Cycle %: 5.79
IAC Position: 97

Set 2
TPS Voltage: 0.92
RPM: 1475
Spark Advance: 27
02 Cross Counts: 77
MAP kPa: 57
Injector Duty Cycle %: 5.70
IAC Position: 92

This is fairly consistent between the two sets. The higher SA set has higher O2 Cross Counts and a lower Injector Duty Cycle and IAC Position when comparing equivelant TPS/RPM data.