Results 1 to 12 of 12

Thread: .tun file help for 98 ~ 00 Black Box 5.7 Vortec / 4L80E

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    I don't think stall speed is a PCM function? Have to check tranny specs on TCC. IIRC diesel TCC stall is much lower then gas...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Carb and Points!
    Join Date
    Mar 2013
    Age
    41
    Posts
    3
    The diesel converter stalls a little lower than what would have come in that combination from factory. Even the factory converter stalls two low and makes the engine work just to pull away from a stoplight.

    This past fall I rebuilt my 4L80E in the 98 K2500 because I broke the reverse band. I used a reman converter from a 99 G2500 van with a 4.3V6 and 4L80E. The converter code is B82. This is the highest stalling converter from factory for a 4L80E that fits the L31. You need the 6 Lug flywheel which you should be using anyway when swapping to the 4L80.

    This was by far the best mod I have done to this truck. It gets up and goes at any speed and shifts and locks up perfect with the factory PCM and factory tune. With no codes.

  3. #3
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    Quote Originally Posted by bmc10258 View Post
    The diesel converter stalls a little lower than what would have come in that combination from factory. Even the factory converter stalls two low and makes the engine work just to pull away from a stoplight.

    This past fall I rebuilt my 4L80E in the 98 K2500 because I broke the reverse band. I used a reman converter from a 99 G2500 van with a 4.3V6 and 4L80E. The converter code is B82. This is the highest stalling converter from factory for a 4L80E that fits the L31. You need the 6 Lug flywheel which you should be using anyway when swapping to the 4L80.

    This was by far the best mod I have done to this truck. It gets up and goes at any speed and shifts and locks up perfect with the factory PCM and factory tune. With no codes.
    That 4.3 TC behind teh V8 trick is a good one. I did the same thing with my 4l60e in my 97 Vortec 350 rcsb truck. I used the 4.3 DBLF TC and can brake stall to 2800rpm, much better launch and about 400rpm less rpm drop at the shifts which helps smooth out those big ratio changes of teh 4l60e.
    Just imagine when yupgrading to an actual performance TC.

    peace
    Hog

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •