Questions about finding/using alternate bins

[damanx]

Until I get a prom reader/writer to play around, I am curious about the various amount of bins out there for the 1228062 ecm.

There seems to be quite a few, but about the best way to find all the bins that the 1228062 uses, has been a mix of bins made available by eaglemark in the thread specific to that ecm, google and ebay.

Unfortunately, I have an ACHT prom that I can't find a bin for online, and since I don't have a reader, I can't do anything with it yet. I'd like to find this bin so that I can see what the tables look like in tunerpro.

In the meantime, there seems to be many bins available for slightly different applications listed by the bccfind that I have questions about.

1. I am currently running my auto 700r4 tcc off the original vaccum switch and it's locking up as normal. I've not yet hooked up the TCC from the ECM. I've found a bin, ASSB, which is for a manual transmission with a 3.73 rear. My truck has a 3.73 rear. Can I use that bin?

2. Is there a resource that shows every bin the 1228062 used? (other than what is listed here?)

[RobertISaar]

ACHT
ACHX
ACHZ
ACJA
ACJB
ACJC
ACJD
ACJF
ACJH
ACJM
AHZW
AHZX
AJTJ
AJTM
AJTH
AMRW
AMRX
ANKB
APAL
AWLN
AZUU
AZUW
AKHS
AKHT
ANFH
ANFJ
ASSB
ASSC
ATHC
ATHD
ATBA
AZNU
AZNW

that should be all of them.

[EagleMark]

2. Is there a resource that shows every bin the 1228062 used? (other than what is listed here?)

You can buy Cal Data from TunerCat for $20 IIRC...

Or look up the BCC Find thread, I think 1project2many implemented a reverse search with certain parameters.

If you have an Auto trans use an Auto trans bin. There is a lot of differences between Auto and Manual bin files!

[1project2many]

Yes, the reverse search should be working. If not lmk.

[damanx]

Where is the reverse search? All I see is the "enter bcc code" box.

[EagleMark]

Yes, the reverse search should be working. If not lmk.

I can't seem to make it work? Wasn't there a different page or?