got a chance to do an idle datalog.
got a chance to do an idle datalog.
Looked good! Hows it feel?
That was a long idle log, wasn't to bad but got rich, got better at the one point you revved the engine. To do a good data log for idle adjustments I like to do it at the end of a data log.
Drive around while it warms up to 175+, then start a log, try to do 10% throttle onto freeway till it runs out. Next off/on ramp do 02%, then 30%, some freeway cruise, some around town. One WOT run. Then at end of log let it idle a couple minutes.
The TBI intake is wet, letting it idle that long and using it for data don't work... getting a few minutes at end of log is more accurate!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
will do that Saturday when the wifey is at work and the dogs are all put up.
did a datalog today but I guess I went to long and it stopped. wasn't able to save it except to an excel file. is there a way I can get the datalog and save it so we can see it. I am still able to watch it.
Should still be there in TunerPRo, just open and see what log is there, then play it... but no way to save then... I can't find where it is stored? Would have to ask Mark M at TunerPro and he would know where the temp location is to retrieve the file.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
After recording just stop and wait, it will prompt you to save as xdl file...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
its another long one. but I think I was able to get a bunch done.
Bookmarks