This came out of a mud buggy I diag'd today.
Issue turned out to be a bad injector plug,but uploaded .bin to take a look at it since it wasn't going into closed loop and showing no trim data.
Unfortunately,I can't open the damn thing up.
I can see it in Tunerpro,but have barely messed with TP and still not used to it.
Nearest I can tell is it is a silverado base file with maybe a corvette segment swap?
I can't find what I want in TP,trying to get TC lined out so it will recognize the cal.
The OS is in my .dat file for that VDF but when it flags the cal upon opening it does reference the os number with more zero's than the dat shows.
Anyway,take a look and let me know if you find anything interesting please.
Engine is supposed to be a takeout 6.0 with a custom harness just for a jeep/tube chassis swap,built by someone semi local to the area apparently.
Not sure how this harness is setup as far as range switch,auto/manual etc..
Truck itself is a tube frame/jeepish thing and runs a th350 trans.
Hope to line out my TC issues,if not i'll drop a pm to John on monday.
This is labeled as a corvette only because the calibration information had it labeled as a corvette so I carried it into the title as well as os and pcm id's (along with buddies name,colton). The PCM was in fact not an 0411 though.
Reply With Quote
Bookmarks