$D5 16156647 Hi from SoCal

[Yucca]

Hi All.
I am working on a 4.3 700R4 swap for a Willys Wagon. I am looking for a .BIN file for ECM 16156647, BALH4796.
I hope someone can help me out.

Thanks
Ron

[EagleMark]

[Yucca]

The Gearhead BCC finder agrees with the donor year, model and ECM#. BALH 4796 is on the Memcal.
I would have to find a way to copy the info from the memcal.
Thanks

[EagleMark]

Well that's what the files are for in link above to use with TUnerPro. Here's the Tutorial:
http://www.gearhead-efi.com/Fuel-Inj...-a-must-read!-)


Then Moates has all the hardware
http://www.moates.net/

Then read chip, change chip and burn new chip.

[Yucca]

If I cant find the BIN and Mask for my setup is there one that is close to start with? Maybe a non-California Astro or S10? I did not find it in a cross reference. I would like to tune it a bit, drip the egr, change the A/C idle speed.

Is a G1 and chip a good idea for this setup? I would rather not distroy the MemCal.

Thanks again.

[EagleMark]

Yes the G1 is the way to go, also need a HDR1 to stick in Memcal to read the chip.
http://www.moates.net/hdr1-memcal-he....html?cPath=64

Still need a reader, burner like the Burn2
http://www.moates.net/burn2-chip-pro....html?cPath=64

And a cable to data log:
http://www.gearhead-efi.com/Fuel-Inj...uy-ALDL-Cables!

[Yucca]

and I'll update the TunerPro RT XDF and ADX files I worked on recently.

What ADX with this setup?

[EagleMark]

That was for $94 that I thought your vehicle was, yours is $D5 XDF and ADX/ADS/DS is A178 and has never been built that I can find... It's a complicated one to build and I wouldn't try without a vehicle to test on. But if your lucky or send Robert some beer money he may?

[EagleMark]

Looks like I was wrong and Robert did have an ADX for it...

[Yucca]

Looks like I was wrong and Robert did have an ADX for it...

Got it.

Thanks again.

[1v6pony]

Hi All.
I am working on a 4.3 700R4 swap for a Willys Wagon. I am looking for a .BIN file for ECM 16156647, BALH4796.
I hope someone can help me out.

Thanks
Ron

Ron Can you tell me if this is a CPI or TBI, TPI motor, I have the same ECm from Howell for a 1994 CPI motor, I believe they use the 1992 ECM, tring to see if the bin is the same...
Thanks