My Dual TBI Camaro Project

[Six_Shooter]

You also asked earlier and I did not notice an answer. But yes you have to upload bin to autoprom when you change it in TunerPro. Also when you make a change to bin you need to save it, I think the command is commit! Then it is loaded to AutoProm.

You only need to use the "commit" function if you are using the hex editor to make the mask ID change. Editing the mask ID using the XDF, you just need to save the bin. You can save the single change by using the "save" button in the XDF editor box, then save the bin, as well.