Results 1 to 9 of 9

Thread: File Request.

  1. #1
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244

    File Request.

    Any 1998-2001 Vortec 454/7.4l L21 calibration in Kodiak 4500, P30 van, Workhorse etc etc. This uses the dual 80 pin connectored PCM's 16232148 and 16238212 and OS 9354781T, 9369651T and 9384681T

    This is a VIN for a 1999 GM P12 chassis on which a motorhome was built. It uses a non computer controlled Allison trans. 1GBMP37B2W3311219 I just listed this VIN for access, I dont need this particular vehciles calibration per se.

    Thanks in advance

    peace
    Hog

  2. #2
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    1GDL7H1D0XJ514472 is also another L21 equipped VIN

    thanks

    peace
    Hog

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    That's a rare one, can John at TunerCat get one at last resort?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    Quote Originally Posted by EagleMark View Post
    That's a rare one, can John at TunerCat get one at last resort?
    i assume he could access one if you give him a VIN as he's got the GM discs.. Just thought I'd try here 1st so I didnt have to pay the $25.

    Thanks

    peace
    Hog

  5. #5
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Here you go.
    Attached Files Attached Files
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  6. #6
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    Thanks a lot Jeff, thats cool to have that calibration. I see that its a "D" engine code, I think that means its a natural gas engine IIRC.

    That calibration has 4l60e values in it, but under trans calibration, 0=4l60e, 1=4l80e, 2=Manual are the choices, but #3 is selected. I wonder if the full manual version of the Allison is being used? AT-542(MT9)??

    Engine Identifier is set at ZERO and there are 8 choices, ZERO through EIGHT.

    Speed limit of 78mph, with a hysteresis of 2mph.
    rev limit defuel in P/N at 4400rpm, refuel at 4200rpm
    ETC throttle limit 3750rpm
    ETC speed limit 75mph

    thanks again Jeff.

    peace
    Hog

  7. #7
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    That one had the Allison Trans in it. That tune was not mine. I got it from someone a few years ago.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  8. #8
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    I do believe Gearhead-EFI is now our "Monodax"----The go to place for info.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  9. #9
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    I agree.

    Ive always been interested in using some of the Medium Duy truck options such as Fast Idle which needs the fast idle switch and fast idle indicator lamp. Then there is the PTO idle speed which requires a specific PTO switch.

    Fst Idle switch
    15957294 $18.20

    Fast Idle Indicator Light 15025093 $77.48

    PTO Control 15737895 $124.90

    With a dual 80 pin PCM and the appropriate calibration we shoudl be able to use a fast idle switch.

    Lotsa cool stuff once you get out of the black box PCM.

    peace
    PAuly
    Last edited by Hog; 03-04-2013 at 02:19 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •