Results 1 to 3 of 3

Thread: Installing G1 Adapter form Moates

  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    Installing G1 Adapter form Moates

    Installing the Moates G1 adapter with 27Fs512 chip into PCM.


    Notice in the Memcal that the left side is the chip. The adapter bypass the chip but yuou must install it the same way it came out. Chip to left in PCM, Chip to left in G1 Adapter.




    Pull the Memcal out and slide it on adapter.




    Slide the entire G1 Adapter and Memcal back into PCM, push down so locking clips on each side engage.


    Stay Tuned!
    Attached Images Attached Images

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The pic below is one I'd like share.

    dave w
    Attached Images Attached Images

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Good point, get the chip in the right direction!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •