Wow. Somehow I missed this thread. I'll buy one for my at the moment non-existent TBI equipped vehicle.
PM will be sent.
Wow. Somehow I missed this thread. I'll buy one for my at the moment non-existent TBI equipped vehicle.
PM will be sent.
Familiar with 1227747 and 16197427 PCMs
hey everybody, sorry about the lack of updates, going through a slight design change and am verifying that everything will still be working as expected. moving to a significantly smaller(about 60% smaller) PCB inside of the box to give an easier assembly/more room. also moving to a 6 foot mini-B cable for now, instead of the 4 foot B cable. my parts supplier was getting was too inconsistent in what they were sending me, so i went elsewhere to keep everything easier to interchange if necessary.
knowing me, yet another revision will be made, but it will probably be a while before that comes around... i've been buying the PCBs rather than having them made for me. because of this, i basically have to adapt to whatever i can find, rather than make what would work best. i just have to make sure i'll be able to reliably hot air solder the FT232 chips, since SSOP-28 can be done with an iron but it's not as clean as i would like.
anyways, as soon as i verify that the new PCB will work, i'll be ordering quite a few of them, there's a lot of backed-up orders/requests.
Sweet!! Thanks for the update!
I suspect you already know of this place, but they'll do short or large runs of custom PCBs for you: www.batchpcb.com
Familiar with 1227747 and 16197427 PCMs
maybe i'm blind/tired, but i couldn't find any way for them to do an estimate on custom boards without me actually sending them gerber files?
in any case, the boardhouse i'm looking at should be able to do batches for me in multiples of 40 at VERY reasonable prices.
Thanks for the update! My project is slowly moving forward, so your timing is perfect.
Familiar with 1227747 and 16197427 PCMs
Just tell me how to buy,how far out till I can get ahold of it?
Bookmarks