Support The Forum: Buy ALDL Cables!

[EagleMark]

Well thanks Robert. I didn't know about the $5. It will go to upgrades I've been wanting to do...

Nice Red X picture!

[RobertISaar]

bad linking. should be fixed now.

[Six_Shooter]

Is it just the picture or is there only an inch or so between the 12 pin connector and the box?

[RobertISaar]

it's not the picture.... i can't find a source for the molded connectors that are longer, have the correct pins present and are cheaper. aldlcables.com wants $21/shipped just for their connector.

while the wires could be extended, that would make a weak point in the cable since solder won't hold up to being tweaked/twisted/abused the way copper can. this is the best compromise i can come up with. i've used them as-is without issue, but the location of the port will really be the biggest factor in how easily they will work. the port location on a W-body works great.

[Tunedperformance]

I'll take one to try on a 730 what's your paypal address robert ?

[RobertISaar]

it would take me a few weeks to get the parts needed shipped in...

i really need to just stockpile a good 10 or so of everything needed to get the stuff done within a day of a request.

[EagleMark]

Does this have a 10k switch that can be turned on AND off?

[Tunedperformance]

I'll take one to try on a 730 what's your paypal address robert ?

I never heard back , take me off the list please.

[RobertISaar]

ugh, that's what happens when it takes 5 1/2 months to find reliable suppliers combined with my spotty record-keeping.