Support The Forum: Buy ALDL Cables!

[RobertISaar]

it would take me a few weeks to get the parts needed shipped in...

i really need to just stockpile a good 10 or so of everything needed to get the stuff done within a day of a request.

[EagleMark]

Does this have a 10k switch that can be turned on AND off?

[Tunedperformance]

let me know when I can get one

[RobertISaar]

Does this have a 10k switch that can be turned on AND off?

that is what the switch on the side is for... could also make it a direct link if for some reason you wanted to be able to flash codes on the SES light if you knew you would never need the 10K resistor.

[EagleMark]

Cool! Cables got to have an on/off 10k switch!

I'll take two!

[RobertISaar]

i guess i should start ordering parts then... :D

[sherlock9c1]

I'm interested in one as well for my '94-95 LT1s. But let me ask - I have an existing ALDL cable that's 6' long - could you make an option where you send me the box all built up with everything BUT the ALDL cable portion and then I'll just wire my ALDL cable into the box myself?

[RobertISaar]

i wouldn't mind it at all... if you can solder onto a .1" pitch header(or through-hole if the header is removed) then you shouldn't have issues attaching any cable to the converter board. i would need a estimate on the diameter of the insulation for the cable so that the box can have the proper sized hole in it to pass the cable through.

if you can't, or don't want to risk it, then you could mail me the existing end and i'll attach it. expect around ~$2.30 to ship it USPS first-class in a padded envolope.

either way, that's less parts for me to buy, so i can cut you a break on the price as well.