Hey T-Rex, just wanted to check with you on if the 8.1l bin is just a stock factory file?Originally Posted by T-Rex
'04 C1500 5.3L os12587603.bin (1.00 MB)
[ATTACH]18663[/ATTAC04 Avalanche SprChps-Tow 4x4.bin
quite a bit of timing in that bin. Does super Chips say to run premium fuel?
No need to re-invent the wheel. But we can make it better
OS 12587603 P59. Stock 2004 vette tune T56 standard trans Segment swopped Engine ID from active flex 2004 Taho. Vin was changed to 2002 Vette when P59 ECM upgrade.
OS 12587603 P59. Stock 2004 vette tune 4L60E Segment swopped Engine ID from active flex 2004 Taho. Vin was changed to 2002 Vette when P59 ECM upgrade.
HP Tuners files of each see .hpt
Would this tune work on my 2001 with a stock (P01) pcm?
Last edited by Vetteyog; 12-07-2022 at 06:17 PM. Reason: Add quote
Brad Y
2001 Chevrolet Corvette Convertible
Navy Blue Metallic
6-Spd
Z51
No, you would need a 512kb bin file from a P01.
Yea, I missed that, thanks!
Brad Y
2001 Chevrolet Corvette Convertible
Navy Blue Metallic
6-Spd
Z51
Correct, like Pulse_GTO said the PO1 is 512kb and the P59 is 1meg. So you would not be able to to fit it onto a PO1 ECM. PCM Hammer wont allow putting any P59 onto a PO1 or vice versa even though the PO1 is a smaller tune. That is one of the reasons I changed to the P59 from the PO1. The P59 is larger & a faster processer. It did entail rearranging several of the ECM pins from my 2002 vett harness ECM plug to correspond to the correct P59 outputs. But for those who have 2004 / P59 GM ECM'S this will quickly get you going with FLEX fuels or Boosted applications
yes it does
yes it does atleast 91oct or above
JamieD, did you ever get ahold of this file or find another one you could share?
Which xdf/bin file should I use for an 04 tahoe 5.3? flex fuel I believe.
Last edited by Professwrx; 04-10-2023 at 11:47 PM.
Not sure how usable this file is to anyone, but here is the BIN file from my 2004 GMC Envoy, P10 PCM.
Brad Y
2001 Chevrolet Corvette Convertible
Navy Blue Metallic
6-Spd
Z51
I'm hoping someone can help me out i been looking at the bin files but I'm unsure if any of them will help me out. just a little background info on what I'm doing first. i got a DBW 2004 chevy avalanche 4x4 non flex LM7 5.3 engine from a junk yard with computer everything is stock and i got it running in a G-body Oldsmobile with a th400 transmission. the xdf file im using is 12587603 and its not correct for tuner pro (serv.no 12586242) so im limited in what im seeing and what i can do. so can i use a different lm7 5.3 bin file that has the correct xdf ? my goal here is to get everything set with flex fuel with a non electronic transmission and be able to use my radiator fan turn on and off. i already tried to turn off the transmission in tuner pro but still get error codes from the computer
Posting Permissions
Reply With Quote
Bookmarks