Page 2 of 2 FirstFirst 12
Results 16 to 30 of 30

Thread: 2003 TunerPro Bin Files

  1. #16
    Fuel Injected!
    Join Date
    Jun 2014
    Posts
    229
    ....
    Last edited by LRT; 05-24-2021 at 11:25 PM.

  2. #17
    Carb and Points!
    Join Date
    May 2020
    Age
    44
    Posts
    3
    Hi everyone. Newbie. Justed wanted to know if anyone have a bin file for a ecm that I picked up at the junkyard for me to learn how to remove vats. I also have another ecm for the 5.3l engine and tranny I picked up at the junkyard. But first I want to use one of them to learn how to use. It's from a 03 Tahoe 2wd 5.3l with a 6L60e tranny. The number on the pcm is 12582607.
    If any one has a bin please help me out. I appreciate it.


    Joey

  3. #18
    Fuel Injected!
    Join Date
    Nov 2019
    Location
    Bossier City, Louisiana
    Age
    63
    Posts
    308
    A 6L60E transmission in a 2003 Tahoe? Are you sure on that? Maybe a 4L60E transmission? That trans would have been typical for a 2003 Tahoe and as far as I can tell, GM never made a 6L60E. The 6L80E came out in 2006 and it could have been possibly retrofitted to a 2003 Tahoe with a 5.3 liter but you won't find a stock 2003 6L80E BIN mated to a 2003 engine. That combo did not exist in 2003.

    If it is a 4L60E that you have, there are several combos with richly detailed XDF files around here for 5.3L engines and 4L60E transmissions. Basically, you would completely overwrite (after making a copy) your 12582607 BIN and replace it with one of these:

    12208322

    12212156

    12202088


    Rick
    1970 Chevy El Camino, LM7 Engine, 4L60E - Two 896 and two 0411 PCM's

  4. #19
    Carb and Points!
    Join Date
    May 2020
    Age
    44
    Posts
    3
    Hi there Rick. Nice to meet you. Thank you for hour info and hour right about that tranny. I just happen To make a mistake in tying that tranny. The right tranny was a 4L60E. I’m using this Ginny pig pcm so I could learn how to remove vats. I also have another pcm that came from a 03 Tahoe 5.3l 2wd with a 4L60E tranny. I bough this so I could put it in on a 1951 GMC 100 pickup. So I’m try to learn how to remove the vats so I could get it started.


    Thank you have a good day.
    Joey from Cali

  5. #20
    Carb and Points!
    Join Date
    May 2020
    Posts
    2
    About the 03 with the return. If i use a 04 os on my 03 engine would i just compare injector flow rate and copy whats on the 03 tune onto the 04 bin through tunerpro? If that makes sence

  6. #21
    Carb and Points!
    Join Date
    Aug 2020
    Posts
    5
    I'm looking for the same.

  7. #22
    Carb and Points!
    Join Date
    Aug 2020
    Posts
    5
    Quote Originally Posted by N2OInsane View Post
    Does anyone have an XDF file for the 12579405?
    I'm looking for the same XDF file.

  8. #23
    Fuel Injected!
    Join Date
    May 2019
    Location
    Hampstead, MD
    Posts
    93
    2003 Workhorse P42 Chassis L31 5.7L 4L80E Flashed into a 12200411 with TIS2000 and then read with PCM Hammer
    OS 12212156
    Stock Unmodified
    Attached Files Attached Files

  9. #24
    Fuel Injected!
    Join Date
    Aug 2018
    Posts
    33
    2003 chevy express 2500 van 5.3-4L60E updated. (thanks to kur4o)
    Attached Files Attached Files

  10. #25
    Fuel Injected!
    Join Date
    Apr 2020
    Location
    Belarus
    Age
    33
    Posts
    100
    03 Hummer (2 cars)
    Attached Files Attached Files

  11. #26
    Carb and Points!
    Join Date
    Sep 2020
    Age
    27
    Posts
    1
    I need a matching xdf file for my 03 5.3 dbc 12579405 is my bin i need xdf for that bin or a new bin and matching xdf to write to my 03 pcm to make it run with no vats .

  12. #27
    Carb and Points!
    Join Date
    Nov 2020
    Age
    46
    Posts
    9
    any 2003 Deville bin files? anyone upgrade to an 0411 computer for caddys?

  13. #28
    Fuel Injected!
    Join Date
    Aug 2018
    Posts
    33
    03 Silverado 1500 with 3.73 gears and 26 gallon fuel tank. 5.3L 4L60E.

  14. #29
    Carb and Points!
    Join Date
    Dec 2021
    Age
    21
    Posts
    7
    hey just so you know, in this bin file (12579405) you have downshift from 3>2 set above max speed meaning it could manually downshift from 3>2 at any speed. thatll trash a stock 4l60 considering max speed is 26mph higher than stock. correct me if im wrong but i think it should be noted.

  15. #30
    Carb and Points!
    Join Date
    Dec 2021
    Age
    25
    Posts
    2
    Pulled this bin today off of a random loose pcm laying around. I believe it to be from a 2003 6.0/80e van
    Attached Files Attached Files

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •