Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: GM doesn't show my PROM exists...'90 454ss

  1. #1
    Carb and Points!
    Join Date
    Jan 2013
    Posts
    6

    GM doesn't show my PROM exists...'90 454ss

    Hello, just joined this site in my desperate search for a PROM chip for my 1990 chevy 454ss.
    It had an aftermarket hypertech chip that is no good, and I can't seem to cross reference it anywhere.

    I went to the local GM, and my truck apparently doesn't exist. This truck is a 7.4l with a 3-speed, half ton short box. The only truck with this set up on their list is a ONE ton.

    The truck has at the moment, a 5.7l so I need a chip for this as well. But they dont show any numbers for trucks with 5.7l's and a three speed.

    I need a stock PROM chip for a 454ss (that the dealership can't even find) and a PROM chip for the same setup but a 5.7l in place of the 454 (temporary)

    Here are the numbers off the front of my ECM (layed out something like this):

    SERV. NO. 1228747 ATDX
    86ATDX K300650694

    16143781 ATDX

  2. #2
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    The man who says something is impossible, is usually interrupted by the man doing it.

  3. #3
    Carb and Points!
    Join Date
    Jan 2013
    Posts
    6
    Thank you Six_Shooter, that is actually the page that came up when I did a google search. But I don't even know what to do with this imformation. I see that one file there that sais ATDX 90 C-1500 7.4TBI 3 speed auto.BIN‎, I'm assuming if I had the tools, this would be the file needed to tune the chip?

  4. #4
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    I have ATDX, do you have a chip burner?

    Looking for one to match your ECM and 5.7L... I have one but think it's Open Loop Leaded fuel export bin... still looking...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  5. #5
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    Actually ATDX was superceeded to AUMU. I have that.

    For the same ECM with 5.7L is AKWA and I have that. Do you need chips burned? Or do you just want the files?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  6. #6
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,861
    Here are cals that match the ecm/engine/transmission you have. It's up to you to match year and vehicle / GVW as you need to.

    ***Found!!!
    BCC year is 1987

    BCC= AUJ 4198 Scan id= 7471 Part number= 16064197
    Release date= 01/02/86 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01227747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON R20,2WD,3/4 TON
    R2500,2WD,3/4 TON R30,2WD,1 TON R3500,2WD,1 TON
    V20,4WD,3/4 TON V2500,4WD,3/4 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NB2 CALIFORNIA REQUIREMENTS

    ***Found!!!
    BCC year is 1989

    BCC= AKUU1131 Scan id= 4501 Part number= 16121130
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NA4 GVW ABOVE 8500 LB
    With NB2 CALIFORNIA REQUIREMENTS

    ***Found!!!
    BCC year is 1989

    BCC= AKWA1135 Scan id= 4551 Part number= 16121134
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C1500,2WD,1/2 TON C1500,2WD,1/2 TON C2500,2WD,3/4 TON
    C2500,2WD,3/4 TON C3500,2WD,1 TON C3500,2WD,1 TON
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With C6P GVW RATING (8600 LBS)
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NB3 GVW ABOVE 10000 LB
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1989

    BCC= AKWC1139 Scan id= 4571 Part number= 16121138
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NA5 FEDERAL REQUIREMENTS
    With NA6 ALTITUDE REQUIREMENTS
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1989

    BCC= AKWJ1183 Scan id= 4611 Part number= 16121182
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON R2500,2WD,3/4 TON
    R2500,2WD,3/4 TON R3500,2WD,1 TON R3500,2WD,1 TON
    V2500,4WD,3/4 TON V2500,4WD,3/4 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1989

    BCC= AKWL1191 Scan id= 4631 Part number= 16121190
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NA5 FEDERAL REQUIREMENTS
    With NA6 ALTITUDE REQUIREMENTS
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1989

    BCC= AKWT1195 Scan id= 4691 Part number= 16121194
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NB2 CALIFORNIA REQUIREMENTS

    ***Found!!!
    BCC year is 1990

    BCC= AKWA1135 Scan id= 4551 Part number= 16121134
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C1500,2WD,1/2 TON C1500,2WD,1/2 TON C2500,2WD,3/4 TON
    C2500,2WD,3/4 TON C3500,2WD,1 TON C3500,2WD,1 TON
    G30 VAN,2WD,1 TON G35 VAN,2WD,1 TON

    Options:
    With C6P GVW RATING (8600 LBS)
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NA4 GVW ABOVE 8500 LB
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1990

    BCC= AKWJ1183 Scan id= 4611 Part number= 16121182
    Release date= 11/16/87 Engine size= 5.7 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C2500,2WD,3/4 TON C2500,2WD,3/4 TON G30 VAN,2WD,1 TON
    G35 VAN,2WD,1 TON K2500,4WD,3/4 TON K2500,4WD,3/4 TON
    P30 COMM. 1 TON P35 COMM. 1 TON

    Options:
    With L05 5.7L GAS 8 CYL (5.7K) V8 TBI
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NM8 EMISSION SYSTEM, LEADED FUEL


    /8747/
    /L19/
    /M40/

    ***Found!!!
    BCC year is 1990

    BCC= ANZN9786 Scan id= 9481 Part number= 16129785
    Release date= 11/16/88 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C3500,2WD,1 TON C3500,2WD,1 TON K3500,4WD,1 TON
    K3500,4WD,1 TON P30 COMM. 1 TON P35 COMM. 1 TON
    R2500,2WD,3/4 TON R2500,2WD,3/4 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1990

    BCC= ANRS0273 Scan id= 6841 Part number= 16130272
    Release date= 11/16/88 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C3500,2WD,1 TON C3500,2WD,1 TON G30 VAN,2WD,1 TON
    G35 VAN,2WD,1 TON K3500,4WD,1 TON K3500,4WD,1 TON
    P30 COMM. 1 TON P35 COMM. 1 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1990

    BCC= ANZM0277 Scan id= 9471 Part number= 16130276
    Release date= 11/16/88 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C1500,2WD,1/2 TON C1500,2WD,1/2 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1

    ***Found!!!
    BCC year is 1990

    BCC= ATDX4282 Scan id= 3781 Part number= 16144281
    Release date= 05/12/89 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C1500,2WD,1/2 TON C1500,2WD,1/2 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1

    ***Found!!!
    BCC year is 1990

    BCC= AUMU1509 Scan id= 1281 Part number= 16151508
    Release date= 02/07/90 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C1500,2WD,1/2 TON C1500,2WD,1/2 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1

    ***Found!!!
    BCC year is 1990

    BCC= AUMZ1513 Scan id= 1331 Part number= 16151512
    Release date= 12/19/89 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C3500,2WD,1 TON C3500,2WD,1 TON G30 VAN,2WD,1 TON
    G35 VAN,2WD,1 TON K3500,4WD,1 TON K3500,4WD,1 TON
    P30 COMM. 1 TON P35 COMM. 1 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    Without NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1990

    BCC= AUNZ1521 Scan id= 1471 Part number= 16151520
    Release date= 02/19/89 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C3500,2WD,1 TON C3500,2WD,1 TON K3500,4WD,1 TON
    K3500,4WD,1 TON P30 COMM. 1 TON P35 COMM. 1 TON
    R2500,2WD,3/4 TON R2500,2WD,3/4 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    With NM8 EMISSION SYSTEM, LEADED FUEL

    ***Found!!!
    BCC year is 1990

    BCC= AYKK5531 Scan id= 5451 Part number= 16165446
    Release date= 03/26/91 Engine size= 7.4 Trans Type= Auto trans
    ECM/PCM: ECM #01228747
    Used in trucks: GMC
    Possibly used in:
    C3500,2WD,1 TON C3500,2WD,1 TON G30 VAN,2WD,1 TON
    G35 VAN,2WD,1 TON K3500,4WD,1 TON K3500,4WD,1 TON
    P30 COMM. 1 TON P35 COMM. 1 TON

    Options:
    With L19 7.4L GAS 8 CYL TBI V8
    With M40 AUTO 3 SPD TORQUE CONV VAR 1
    Without NM8 EMISSION SYSTEM, LEADED FUEL

  7. #7
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    I love BCC!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  8. #8
    Carb and Points!
    Join Date
    Jan 2013
    Posts
    6
    I need a chip. I don't have a burner or anything. I would get one but it's not worth it for me, im just trying to get my truck to run. I can get one at my local parts store (they send a chip away and get it tuned) but I have to give them the number on my chip...which I don't have.

    NOW, can someone fill me on this: My transmission is NOT electronic, so does it matter if I got a chip from a same year/model that had a 4 speed?

  9. #9
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    Just call me, PM sent...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  10. #10
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,861
    It can matter. If your truck has a Turbo 400 trans and the kickdown operation is controlled by the ecm (typical situation) then a manual transmission calibration will screw things up royally. The shift light wire in a manual trans truck is used for kickdown control in a 400 so imagine what can happen there. Similar stuff would happen with a 700R4 with locking converter... the converter would lock whenever the chip thought it was time to shift gears.

  11. #11
    Carb and Points!
    Join Date
    Jan 2013
    Posts
    6
    Just picked up an ecm from a buddy to try. 1227747 86asdu k 301731237. Prom is asdu. Will it work for the 350?

  12. #12
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    The man who says something is impossible, is usually interrupted by the man doing it.

  13. #13
    Carb and Points!
    Join Date
    Jan 2013
    Posts
    6
    I know its for a 350 and a 700r4. My truck has a th400 and. A 3.73 rear end. Will it work with my transmission?

  14. #14
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    It will run and drive. But who knows what will happen when TCC kicks in as this is the same signal that TH400 uses for down shift soliniod? Look at how pin A7 is used between 700R4 TCC and TH400 downshift solinoid.

    700R4 chips are differant the TH400 chips. Wiring is also differant between the 2.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  15. #15
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,861
    If you can do wiring then you can install a THM400 kickdown switch on the throttle pedal and separate the ecm.

    Didn't Eaglemark offer to burn a chip for you?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •