data logging question

[Cricket_crawler]

I am new to gearhead, and am in the process of burning my first chip, I injected my IH Scout 4-5 years back and its time to dial it in a bit. I have purchased the Burn2, G2 memory adpt, 27sf512 chips, and ZIF socket so I think I am ready. In reading up on the TunerPro RT set up it says that you can use this program to stream data...will this replace the need for winaldl and furthermore aldltobin? I apologize if this is a repeated question but I try to ask for clarification before jumping in to something. thanks

[EagleMark]

TuernPro RT is a bin definition editor like TunerCat and a data logger like WinALDL or Datamaster in one program. With differant files you can do many differat vehicles as well.
http://www.gearhead-efi.com/Fuel-Inj...is-a-must-read!-)

As far as getting away from ALDLtobin... well we have spreadsheets to use BLM data from history tables to adjust VE.

What ECM and or mask are you working with?

[Cricket_crawler]

I am using a 1227747 ecm $42 mask and the ASDU bin/chip.

Also, when downloading the $42-1227747-V3.xdf file I am only seeing the -V4T.xdf...I take it that is the current upgraded file or did I miss the boat there?

[EagleMark]

Those had some changes for Turbo 400 trans.

Better choice is $42-1227747-V5.x.xdf and adx in this thread.
http://www.gearhead-efi.com/Fuel-Inj...Information-42

[Cricket_crawler]

Nice, I have everything loaded into tunerpro RT as suggested per starter page. Now I have some logged data from a couple weeks ago from the winaldl program. It is saved as a _BLM file, how would I bring this data into tunerpro? Can I use this data then to burn a new chip or should I log the data through tunerpro RT first?

[EagleMark]

I'm not sure if yhou can use that at all?

WinALDL is just BLM data.

TunerPro RT you get all data! Just get a new log, you'll be amazed.