Looking for two old PCM connectors, and/or a source for the pins to build a bench programming setup for '94-95 GM 16188051 PCM. I found these pins by searching, not sure if they are correct or not. http://www.bmotorsports.com/shop/pro...roducts_id/497 . Any direction would be appreciated. The PCM uses four 32 pin Micro-pack 100W series connectors. I need two connectors to build the programming cable, or I can just use pins and manually attach them.
I'm Bob 1994 Z28, A4, CAI, Cam, 1.6RR's, LT's, stall, cat-back, TunerCat $EE, TunerPro RT, TTS Datamaster. Also 2007 GMC Envoy mail order tune , 2015 Kia Sorento stock..
those look like the right ones... the 93-95 P66 V6 PCM uses the same connectors/pins(with the exception of the P66 V6 having 3 connectors, not 4).
do you know which color connectors you need? i think i have a spare black, clear and blue. i also have a bunch of spare pins.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
Black and Blue...
1994-1997 LT1/LT4/L99 GM
4.3L V8 -- 5.7L V8
Black Connector Pin B15 Battery 12V
Black Connector Pin B30 Battery 12V
Black Connector Pin B16 GROUND
Blue Connector Pin D1 Ground
Blue Connector Pin D3 Switched 12V (ignition)
Blue Connector Pin D7 Serial Data (1996-1997LT1)
Blue Connector Pin D29 Serial Data (1994-1995)
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Robert, I'd love to have both the black and blue to keep it cleaner, but two of any color would work. Plus 7 pins with a couple of spars. I'm planning on using the Arduino FT232RL setup in you "Uber-easy USB ALDL" post. Plan is to build a 'USB to PCM' box/harness with +12/gnd/USB as inputs and one cable with two PCM connectors as output. Box would have a +12v ign on/off toggle.
Buy the way I never put an ammeter on a PCM, do you guys know how many total (batt & ign) amps I need for a power source ? If low enough I may think building it into the test box..Then I would only need 120v AC and USB as input and that would make the setup cleaner.
Back to the connectors and pins, there is a junkyard on e-bay selling those connectors for $20.00 each and new pins are going $0.50 each so I don't expect a free ride. Let me know what you want for the stuff and shipping. We can work something out, PayPal or whatever. Thanks Bob D.
I'm Bob 1994 Z28, A4, CAI, Cam, 1.6RR's, LT's, stall, cat-back, TunerCat $EE, TunerPro RT, TTS Datamaster. Also 2007 GMC Envoy mail order tune , 2015 Kia Sorento stock..
my 16149396 bench draws just over 1/2 amp... i imagine yours will be similar.
yeah, i have quite the deal for you compared to those prices.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
PM sent.. I never throw away any of the old 120vac to DC power converters, got a full box of them. Found a 12V @ 1.0 A, that should work..
I'm Bob 1994 Z28, A4, CAI, Cam, 1.6RR's, LT's, stall, cat-back, TunerCat $EE, TunerPro RT, TTS Datamaster. Also 2007 GMC Envoy mail order tune , 2015 Kia Sorento stock..
Posting Permissions
Reply With Quote
Bookmarks