Results 1 to 9 of 9

Thread: v10 motor home

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884

    v10 motor home

    does any one know what tells the pcm to pulse the injectors on a 2001 v10 ford? the engine is in a motor home.

  2. #2
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    The crank and cam signals are both needed for the injectors to fire.

  3. #3
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    thanks for the reply, every thing is all cramped up in the engine compartment. give it a shot of ether it will run till you stop sraying.its proble the cam sensor it has fuel pressure.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by ony View Post
    thanks for the reply, every thing is all cramped up in the engine compartment. give it a shot of ether it will run till you stop sraying.its proble the cam sensor it has fuel pressure.
    The engine needs fuel, air, and spark to run. If the engine is running with ether starting fluid, I would think the engine is not getting fuel. The not getting fuel could be the computer is not turning on the injectors to spray fuel. The not getting fuel could also be, a bad fuel pump or maybe a bad fuel pump relay? I think I would test the fuel pressure at this point.

    dave w

  5. #5
    Administrator
    Join Date
    May 2011
    Location
    Lakes Region, NH
    Age
    54
    Posts
    3,847
    You said it has fuel pressure? If so you might want to check to see if the computer is pulsing the injectors using a special test light called a "noid light." It's always possible that one of the sensor values is off enough that the engine won't run. Then again, if the cam sensor is easy to access and it's cheap enough it's probably easier than digging out one of those injector connectors.

    Yes, I know it's cramped. All we have are vans and cutaway van chassis. You should see what we've got going on right now on a 6.0 diesel in an E450 chassis.

  6. #6
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    is that 6.0 one of them that leak water though the egr into the engine making it look like a bad head gasket?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •