Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: Need a MEMCAL

  1. #1
    Fuel Injected!
    Join Date
    Mar 2012
    Posts
    144

    Need a MEMCAL

    Does anyone have a AUXF or ASTC memcal to sell? Or does anyone know of some places I can check for one?
    Thanks

  2. #2
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    i did a quick check of ebay but no dice.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  3. #3
    Fuel Injected!
    Join Date
    Mar 2012
    Posts
    144
    I had a bad day. Was playing around with a borrowed S-10 and goofed up the MEMCAL while trying to copy the bin.
    What are the chances the AUXM might work?
    Bad MEMCAL = AUXF release 4-26-90 L38engine MD8 700R4 trans
    AUXM release 5-9-90 L38 engine auto trans but the type of auto trans is not identified.
    Alldata shows a 180c 3L30 trans along with the 700R4 in 1991.

  4. #4
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    there's an AUXM BIN floating around.... if you have a modded MEMCAL or adapter, you could always test it in the truck to see if it still acts normally.

    i did do a search on the p/n for the MEMCAL (16153765)and came up with this:

    http://www.gmpartseast.com/parts/gm-...calibrati.html

    not exactly cheap though...
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  5. #5
    Fuel Injected!
    Join Date
    Mar 2012
    Posts
    144
    I get to eat some medicine. It's ordered. Thanks for the lead on the injector.

  6. #6
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    mind if i ask what you did to kill the existing MEMCAL? static or physical damage?
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  7. #7
    Fuel Injected!
    Join Date
    Mar 2012
    Posts
    144
    Carelessly put it in the APU1 wrong. Notch toward handle. Dah!

  8. #8
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    58
    Posts
    10,477
    Quote Originally Posted by POZE View Post
    AUXM release 5-9-90 L38 engine auto trans but the type of auto trans is not identified.
    Platform code for this is Z1, maybe that would tell you what trans?

    AUXF is platform code S10.

    $59 for what? Can't be a memcal? If it's the calibration only how do they send it to you?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  9. #9
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    $59 for a MEMCAL seems reasonable.

    i did find one site that had the AUXF MEMCAL for a little over $5, but they marked it as discontinued.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  10. #10
    Fuel Injected!
    Join Date
    Mar 2012
    Posts
    144
    I sure hope it's a MEMCAL . It says GM Calibrati by the part number.

  11. #11
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    58
    Posts
    10,477
    Calibration is the bin file... $59 for a complete Memcal would be a decent price if it were for the entire Memcal for exactly what you need. Not so much the chip but the Netres and Knock board being correct!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  12. #12
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    it has to be the entire MEMCAL if they're selling it with that part number.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  13. #13
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    58
    Posts
    10,477
    Quote Originally Posted by POZE View Post
    Carelessly put it in the APU1 wrong. Notch toward handle. Dah!
    That's the way it goes?

    https://www.youtube.com/watch?v=TeEremD4Pfw

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  14. #14
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    29
    Posts
    3,026
    BTW: i've accidentally "erased" a 29F040B backwards before.... i've never felt an IC get so hot so quickly. oddly enough, it still works, didn't kill the prom or the burner.

    i take it the old 27Cxxx PROMs don't stand up to the same accidents?
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  15. #15
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    58
    Posts
    10,477
    I'm pretty sure I have read them backwards without damage?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •