just starting to piece together the harness and parts to start the conversion. please give me any advice you may have for this process.
thanks
reg
just starting to piece together the harness and parts to start the conversion. please give me any advice you may have for this process.
thanks
reg
I think having a good wiring diagram is essential! I think either a Camaro or Caprice TBI systems from the early 90's are good systems to adapt for a Corvette. I like the fact that the Camaro and Caprice TBI system use a Manifold Air Temperature sensor.
dave w
The current engine is the stock 350, 4 bbl. It is a 4 speed transmission. I added vortec heads to it a few years ago. I found a 89 truck tbi setup, minus the ecm and vss locally for $100 that I am thinking about picking up. It is supposed to have all the the sensors, wiring harness, tbi and distributor. Does that sound like a good start?
Last edited by cobrareg; 01-03-2013 at 08:43 AM.
Yup, that will work for ya! ECM is about another $40. aftermarket VSS about $100. Lots of time and some tuning and you'll be stylin!
EDIT: It's off a 5.7L engine right? You need the 5.7L TBI.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
With a manual trans, do I need to hook up the vss ? Some posts say I do and some say I don't. I was thinking about the in tank fuel pump. I've read that I can use the in tank fuel pump and sending unit from an 82 vette and it will work. Looks like the whole thing is about $170. Is this early wiring harness pretty easy to sort out, or will I need to buy one already tailored for the conversion? I can at least use a volt meter and trace wires.
Bookmarks