Setting up WB in the ADX editor.

[POZE]

Working on getting the LM2 connected to the AutoProm so I can datalog. I am using 8192 baud ( 165 ECM )
and wondering if the packet offset is 65 and 66 for channel 1?
Also would you normally match the X and Y axis for WB table to the VE table. I other words is there an advantage to making the table larger?
Thanks

[EagleMark]

No advantage to making the table bigger then VE if VE goes as high as your RPM. But like $42 only goes to 3200 in Ve1 so I made it bigger.

What mask ID? Post your ADX.

[POZE]

Thanks

[POZE]

Mark do you see anything that would stop total pulse width from reading?

[POZE]

Sorry I missed a few details.
Bin AWRP mask $94

[EagleMark]

Mark do you see anything that would stop total pulse width from reading?

Maybe? Do you have a datalog/XDL file?

I found the ALDL file for it, A139.ds. The total pulse width is actually Total Async Pulse Width so it may not look right. There is also a BPW that is not included in this ADX which is what other ADX files use and can be converted to Injector Duty Cycle.

Robert Saar may be able to clarify this?

I'll help and look at WB stuff tomorrow. There is actually a lot more that could be added to this ADX...

[POZE]

These are the files I have been using. The data log isn't much.