Results 1 to 4 of 4

Thread: WBO2 connectors.

  1. #1
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968

    WBO2 connectors.

    I'm in desperate need of a female WBO2 sensor connector, for an extension I need to make.

    I have been looking for months and can not find what I need.

    It's basically the end off the WBO2 sensor that plugs into the harness or controller.

    Looks like this:


    If anyone knows where I can find these connectors, post up. A failed sensor that has a good connector would also give me what I want, but would rather start with new unused parts if at all possible.

    I have a couple connectors for the other end of the extension already.
    The man who says something is impossible, is usually interrupted by the man doing it.

  2. #2

  3. #3
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    I had found that site, but was hoping for something more local, at least in North America, if at all possible.
    The man who says something is impossible, is usually interrupted by the man doing it.

  4. #4
    I've ordered from them, took about a week IRC via regular airmail. Good luck finding a NA vendor, I searched high and low for one. The only place I found that would send me the connector and pins was the manufacturer (SPX? Don't remember now) and they had a 12-week lead time for "small lot" orders.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •