Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 10 of 10 FirstFirst ... 5678910
Results 136 to 145 of 145

Thread: Tuning options for Dodge Mopar

  1. #136
    Quote Originally Posted by Asylumwarp View Post
    Anyone ever put a 411 ecm in a 98 ZJ with the jtec pcm? I'm tired of no tuning solutions, I have a bdm... I have successfully talked to 411 ecms thru bdm now. I don't see why I cant communicate with the jtec the same way. Mekkis, do you offer tuning for these cars? If I can pull the bin, do we have a completed xdf with timing tables? If I can pull a bin, I can write it too.
    What do you use to read/write by BDM to 411 PCM's ??

  2. #137
    Carb and Points! darkcorp's Avatar
    Join Date
    Aug 2013
    Age
    36
    Posts
    3
    I have bin file pulled from my wj 4.0 pcm. Pm me if needed.

  3. #138
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    43
    Posts
    124
    Quote Originally Posted by darkcorp View Post
    Hi, guys!

    I live in Russia and build 4.6 stroker ('99 Jeep Grand Cherokee WJ).
    I need to tune my JTEC PCM.
    It has ab28f200 chip so I've unsoldered it and read the programm.
    But PCM has film-like board and while tuning I'll need to soldered the chip several times. That will destroy the film.
    There are some pads near the chip so how can I use them to reprogramm the chip?

    Attachment 11538

    Thanks
    Albert
    A datasheet and a multimeter answers that.

    Those pads alongside the flash are what the "instrumented" 96-98 JTECs daughterboards are attached to.
    There is no mechanical problem so difficult that it can not be overcome by brute strength and ignorance.

  4. #139
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    28
    Posts
    21
    Quote Originally Posted by darkcorp View Post
    Hi, guys!
    I live in Russia and build 4.6 stroker ('99 Jeep Grand Cherokee WJ).
    I need to tune my JTEC PCM.
    It has ab28f200 chip so I've unsoldered it and read the programm.
    But PCM has film-like board and while tuning I'll need to soldered the chip several times. That will destroy the film.
    There are some pads near the chip so how can I use them to reprogramm the chip?
    Attachment 11538
    Thanks
    Albert


    how do you edit the bin, what kind of software are you using ?
    Last edited by 2ss8; 04-09-2017 at 12:35 PM.

  5. #140
    Fuel Injected!
    Join Date
    May 2011
    Location
    Alamogordo, NM
    Posts
    328
    mekkis, you still out there? Any updates to flashing these POS's? I still have the very basic XDF you posted a few years ago. Do you have a more defined xdf you are willing to share?
    '86 Grand National

  6. #141
    Carb and Points! darkcorp's Avatar
    Join Date
    Aug 2013
    Age
    36
    Posts
    3
    Guys!
    Does anyone have definition file (xdf) for my ECU?

    It seem like soon we will have a device to read/write/diag JTEC via OBD.
    Attached Files Attached Files

  7. #142
    Fuel Injected!
    Join Date
    May 2011
    Location
    Alamogordo, NM
    Posts
    328
    Quote Originally Posted by mekkis View Post
    Uh, yo.
    Mekkis, any chance you have a more defined .xdf?
    '86 Grand National

  8. #143
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    43
    Posts
    124
    Quote Originally Posted by 34blazer View Post
    Mekkis, any chance you have a more defined .xdf?
    No, sorry.
    There is no mechanical problem so difficult that it can not be overcome by brute strength and ignorance.

  9. #144
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    42
    Posts
    258
    This guy here http://sykedecutuning.com/store/index.php covers a lot of odd ball mopar stuff. I'm waiting on the laptop based interface to be release $25 credits to tune a vehicle
    Last edited by roughneck427; 11-07-2017 at 05:38 PM.

  10. #145
    Fuel Injected!
    Join Date
    May 2011
    Location
    Alamogordo, NM
    Posts
    328
    Quote Originally Posted by mekkis View Post
    No, sorry.

    Wow, ok. Just lost interest?
    '86 Grand National

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •